Products

Heavy safety/breakaway chain for pontoon trailers. (1X) 1/4x31IN 5000LB Capacity Safety Chain w/ 7/16IN Hook & Latch, Grade 30

SKU: CFSFTYCHN-HVY

Used on all pontoon trailer models

General

Jammy J-51-A 3/4" Single Diode PC Side Marker Light

The Jammy diode side marker light is a 3/4″ Round Single Diode, Amber-Colored LED Marker Light (PC Rated) that mounts in 3/4″ diameter holes. This model includes a mounting grommet, and 6″ leads with blunt cut ends.

MODEL: CFLIGHTSDMRKR-LED(J-51-A)

JBT 1600 'River Hawk' | Galvanized Trailer for 'River Hawk' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 10″ Carpeted Pressure Treated Bunks*
• Fits a 'River Hawk' Jon Boat 
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT1400G | Galvanized Trailer for up to 14' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 6' Carpeted Pressure Treated Bunks*
• Fits up to a 14' Jon Boat
• Carpeted Bow Support Bunk
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Options Available

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT1600G | Galvanized Trailer for up to 16' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 6' Carpeted Pressure Treated Bunks*
• Fits up to a 16" Jon Boat
• Carpeted Bow Support Bunk
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT900G | Galvanized Trailer for 12' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• Carpeted 2″ x 4″ x 6' Flat Bunks*
• Fits up to a 12FT Jon Boat
• Carpeted Bow Support Bunk on all Models
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

General

Jon Boat Trailer Bow Support Bunk Mounting Kit

These are all of the requisite materials needed to mount a 2″ x 4″ x 2′ Black Marine Carpeted Bow Support Bunk onto all Jon Boat Trailer models.

Materials Include:

1 – 3/8″ x 3" x 4.5″ Galvanized U-Bolt

2 – 8″ Galvanized Adjustable Bolster Bunk Bracket

4 – 3/8″-16 x 1″ Galvanized Hex Head Bolts

2 – Galvanized Angular Swivel Bracket

4– 3/8″-16 Galvanized Tri-Lock Hex Nut

4 – 3/8″ Galvanized Flat Washer

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

1 - 5" x 1.25" x .25" Galvanized Flat Plate w/ 9/16" Holes

MODEL: CFBNKKIT-BOWSPRT

Used on

General

Jon Boat Trailer Bunk Mounting Kit

This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto every Jon Boat Trailer model. 

Materials Include:

2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

2 – 8″ Adjustable Bolster Bunk Bracket

2 – 3/8″-16 x 1" Galvanized Hex Head Bolt

2 – Galvanized Angular Swivel Bracket

6 – 3/8″-16 Galvanized Tri-Lock Nut

6 – 3/8″-16 Galvanized Flat Washer

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-JBT

Used on

General

Jon Boat Trailer Fender Mounting Kit

These are all of the requisite materials needed to mount a Galvanized Fender 4.80 x 12” Tire onto every Jon Boat Trailer model.

Materials Include:

2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

2 – 5" x 1.25" x .35" Galvanized Flat Plate

4 – 3/8" Galvanized Flat Washer

4 – 3/8" Galvanized Tri-Lock Nut

MODEL: CFFNDRKIT-JBT

Used on

General

Jon Boat Trailer Winch Assembly Mounting Kit

This kit contains all of the requisite materials needed to mount a 32" Galvanized Winch Assembly w/DL 600 onto all Jon Boat Trailer models.

Materials Include:

2 – 3/8″ x 3.06" x 5.25″ Zinc U-Bolt

2 – 5" x 1.25" x .25" Galvanized Flat Plate

4 – 3/8″-16 Serrated Zinc Flange Nuts

MODEL: CFWNCHKIT-(JBT)

Used on

General

TecNiq License Plate Bracket

TECNIQ MODEL: L95-0B00-1

MODEL: CFTAG-TEC

Used on

ALL COM-FAB TRAILER MODELS

General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB-TOP

Optional for

ALL COM-FAB TRAILER MODELS

General

1-1/2"-20 Lug Nut Stud

The stud material is SAE grade 8, zinc dichromate plated, with a minimum 96 hour salt spray requirement. 

1/2"-20 Lug Nut

MODEL: CFAXLE-BLT(STUD1-1/2)

Used For

ALL COM-FAB TRAILER MODELS

General

Copper Banjo Brake Fitting Washer

This item is used in conjunction with 64" Grey Flex Hose Banjo-Banjo Brake Lines, Brass Banjo Fitting Bolts, and Black O-Rings to connect Aluminum E-Coat Caliber Assemblies on all tandem axle pontoon trailer models.

For use with: 

– 64″ Grey Flex Hose Banjo-Banjo Brake Lines
– Brass Banjo Fitting Bolts
– Black O-Rings

MODEL: CFBRKE-WSHRBANJO

Used on

General

Model 66 Brake Hose Cover

This item attaches to Tie Down "Model 66" 6600 Lb Capacity Hydraulic Disc Brake Actuator w/ 2" Coupler to protect the Brake Hose. Comes with 2 Small Screws. 

MODEL: CFBRKECOVER

Used on

General

2212B - Black Powder Coated Fender with Front & Rear Sidemarker Lights

This fender is mounted onto a PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Silver Tire & Wheel. It has been updated for 2020 to accommodate side lighting.

MODEL:CFFNDR2212B

Used on

PWT-2212B

General

2212G - Galvanized Fender with Front & Rear Sidemarker Lights

This fender is mounted to a PWT-2212G trailer model with a 2212G - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Galvanized Tire & Wheel. It was updated for 2020 to accommodate side lighting.

MODEL: CFFNDR2212G-STEP

Used on

General

Pontoon Boat Trailer Single Axle Mounting Kit

This kit is used to mount a 3500 lb Hydraulic Disc Brake Trailer Axle, or a 2900 lb Idler Trailer Axle to Single Axle Pontoon Boat Trailer Fenders on all Pontoon Boat Trailer models with Single Axle Setups.

Materials Include:

6 - 9/16"-18 x 3" Shackle Bolt

6 - 9/16"-18 Nylock Nut

4 - 3.75" x 1.25" x .25" Zinc Steel Shackle Link

MODEL: CFAXLEKIT-MOUNT(PT-SA)

Used on

PT-1618

PT-1820

General

Pontoon Boat Trailer Tandem Axle Fender Mounting Kit

This kit contains all of the requisite materials needed to mount a Tandem Axle Galvanized Pontoon Boat Trailer Fender onto all Tandem Axle Pontoon Boat Trailer models.

Materials Include:

4 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt

4 – 6" x 1.5" x 1.25" Galvanized Flat Plate

8 – 3/8″ Galvanized Tri-Lock Hex Nuts

MODEL: CFFNDRKIT-PTG(TA)

Used on

General

Pontoon Boat Trailer Tandem Axle Mounting Kit

This kit is used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or two 2900 lb Idler Trailer Axles to Tandem Axle Pontoon Boat Trailer Fenders on all Pontoon Boat Trailer models with Tandem Axle Setups.

Materials Include:

2 - Axle Equalizer

14 - 9/16"-18 x 3" Shackle Bolt

14 - 9/16"-18 Nylock Nut

8 - 3.75" x 1.25" x .25" Zinc Steel Shackle Link

MODEL: CFTANDEMMNTKIT

Used on

General

Pontoon Trailer Winch Assembly Mounting Kit for 4"x3" Trailer Tongue

This kit contains all of the requisite materials needed to mount a Pontoon Winch Assembly onto all Galvanized Pontoon/Tritoon Trailer models

Materials Include: 

2 – 1/2"-13 x 3.06" x 5.31" Galvanized U-Bolts

2 – 1/2" SAE Galvanized Flat Washers

2 – 1/2"-13 Galvanized Tri-Lock Nuts

MODEL: CFWNCHKIT-(PT-G)

Used On

General

2212B - Black Powder Coated Fender

This fender is mounted onto a Pre-2020 PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Silver Tire & Wheel.

MODEL: CFFNDR2212B

Used on

PWT-2212B

PT 2426G | Galvanized Trailer for up to 26' Pontoon Boat 

General

• Fits up to 26' Pontoon Boats
• Tandem Axles* with Independent Suspension
• Loading/Unloading Deluxe Winch Stand with Ladder and Anti-slick Stairs fitted with a High Capacity Winch with Strap and Hook
• Side Swivel Tongue Jack
• 2x4 Pressure Treated Plastic Covered Bunks
• Adjustable Bunks [ -2” ; +2”]
• ST175/80D13 C Load Range  Tire and Wheel Assemblies
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Amber LED Running Lights
• Galvanized Frame, Axles and Wheels

Options Available

• ST175/80R13 D Load Range Tire and Wheel Assemblies
• Spare Tire and Wheel Assembly
• Spare Tire Carrier
• Triton configuration
• Plastic Bunks Covering
• Galvanized Pontoon Guides
• 2x6 Bunks Upgrades
• Hydraulic Disc Brakes**

* Tandem Axle set up may be required
**Brakes May Be Required Per State Law, Check Your Local Transportation Authority For Guidelines and Regulations

Specifications

General

PT1400 | Galvanized Trailer for Mini-Pontoon Boat

Adjustable Bunks [ -3” ; +3”] and winch to better fit different types of vessel.

Specifications