Products

General

'River Hawk' Jon Boat Trailer Bunk Mounting Kit

This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 10′ Black Marine Carpeted Bunk Board onto the JBT-1600 'River Hawk' Style Jon Boat Trailer model.

Materials Include:

3 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

3 – 8″ Adjustable Bolster Bunk Bracket

3 – 3/8″-16 x 1" Galvanized Hex Head Bolt

3 – Galvanized Angular Swivel Bracket

6 – 3/8″-16 Galvanized Tri-Lock Nut

9 – 3/8″-16 Galvanized Flat Washer

6 – 5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-JBT(HAWK)

Used on

JBT-1600 'River Hawk'

General

1/2"-13 x 2.06" x 4.31" U-Bolt, Galvanized - Used on 2" Tubing Axles (up to 3.5K)

General

Kayak/Canoe Trailer Upright Mounting Kit

This kit is used to mount uprights on all Kayak/Canoe Trailer Models.

This kit includes:

2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt

4 – 1/2" SAE Galvanized Flat Washer

4 – 7/16" Galvanized Tri-Lock Nut

 MODEL: CFRACKUPRIGHT-MNTKIT

Used on

2" x 2" x 11GA Galvanized Upright for Canoe/Kayak Kit.  Available in 40", 48", 60", and 72".

General

3" Poly Bow Roller Assembly

This is a section of the Winch Poly Bow Roller Assembly.

Materials Include:

1 – 3″ Poly Bow Roller 
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut

MODEL: CFASSM-POLYRLR(3)

Used on

General

3500 lb Hydraulic Disc Brake Trailer Axle w/ Hubs and Springs, Galvanized

*This Item Is Not Shipped! Only Available For Local Pickup*

This item is used on all tandem, and single axle brake setup pontoon trailers.

Materials Include:

1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Double Eye Springs (1850 lb)

1 - 7000# Galvanized Tie Plate Kit

1 - Vented Rotor Disc Brake Kit

- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.

- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit

**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. It is up to the individual dealer to stay within the guidelines as set by the legal authorities.

MODEL: CFAXLE3500G(DISC)-PT

Specifications

Tubing: 2" Galvanized Square Axle

Load Rating: 3500 lb

Hub Face: 87"

Spring Center: 74"

Overall Length: 92"

Bearing Size: 1-3/8" x 1-1/16"

Optional On

General

Kayak/Canoe Trailer Upright Mounting Kit

This kit is used to mount uprights on all 3IN tubing Trailer Models.

This kit includes:

2 - 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt

4 - 3/8″ Galvanized USS Flat Washer

4 - 3/8″-16 Galvanized Tri-Lock Hex Nuts

General

7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle

This kit is used to mount springs to 2" Square Trailer Axles.

- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.

- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.

Materials Include:

2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing

4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

8 - 1/2″-13 Galvanized Tri-Lock Nut

MODEL: CFAXLE-TIEPLATEKIT(7000-G)

Used on

General

Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue

It is used to mount Actuators to all Pontoon Boat Trailer models w/ Brakes.

Materials Include:

3 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt

3 - 1/2″-13 Top Lock Nut Zinc

MODEL: CFCPLRNUT/BLT-KIT-3

Used on

This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:

2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt
2 – 4" x 1" x .25" Galvanized Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Galvanized Tri-Lock Nut

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

These are the plastic protectors for your canoes and kayaks that go on our 2" square galvanized tubing, though applications are not limited to that particular tubing only. They ship with self tapping mounting screws depending on the length of padding.

General

Black Powder Coated Axle Mounting Kit

This kit is used to mount Black Powder Coated Axles to Black Powder Coated PWT Trailer models.

Materials Include: 

2 - 1/2" x 3" Zinc Hex Head Bolt

2 - 1/2"-13 Zinc Flange Top Lock Nut

MODEL: CFAXLEKIT-MOUNT(Z)

Used on

General

Black Powder Coated Side Mount Spare Tire Carrier

• This item is optional for all of our Black Powder Coated Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The powder coated finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high.
  

*Used on Black Powder Coated Trailer Models Only

TIEDOWN MODEL: #86100

MODEL: CFSTB-SIDE(B)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL BLACK POWDER COATED TRAILER MODELS

General

Kayak/Canoe Trailer Crossbar Mounting Kit

This kit is used to mount crossbars on all Kayak/Canoe Trailer Models post-2020.

This kit includes:

2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt

4 – 3/8"-16 Zinc Hex Flange Top Lock Nut

4 – 3/8″ Galvanized Flat Washer

1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes

2 (each) – 1/2"-13 x 1.5" Bolt, Zinc and 1/2" Serrated Flange Nut to Tighten Crossbeam to Mounting Bracket

General

Coupler Mounting Kit for 3" Wide Trailer Tongues

This item is used to mount Couplers to all trailer models without Brakes.

Materials Include: 

2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt

2 - 1/2″- 13 Zinc Top Lock Nut

MODEL: CFCPLR-MNTKIT(NONBRK)

Used on

ALL COM-FAB TRAILER MODELS

General

Double (Lightweight) PWC Trailer Bunk Mounting Kit, Galvanized - PWT-2212G Models

These are all of the requisite materials needed to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a 2212G trailer model. 

Materials Include:

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-PWT(DBL-LTWT-G)

Used on

PWT-2212G

General

Double (Lightweight) PWC Trailer Bunk Mounting Kit, Zinc-Plated - PWT-2212B Models

These are all of the requisite materials needed to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a 2212B trailer model. 

Materials Include:

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-PWT(DBL-LTWT-PC)

Used on

PWT-2212B

General

Double (Lightweight) PWC Trailer Fender Mounting Kit, Zinc-Plated - PWT-2212B Model

These are all of the requisite materials to mount a Black Powder Coated Fender 4.80 x 12" Tire onto a 2212B trailer model.

Materials Include:

4 – 3/8″ Zinc Hex Flange Top Lock Nut

MODEL: CFFNDRKIT-2212B (OBS)

Used on

PWT-2212B (Pre-April 2024)

General

Tandem/Double PWC Trailer Bunk Mounting Kit - PWT-2213/4G Models

These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto a 2213G trailer model. The kit can also be used to mount a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a 2214G trailer model.

Materials Include:

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-PWT(DBL-G-25)

Used on

General

Double PWC Trailer Bunk Mounting Kit, Zinc-Plated - PWT-2213/4B Models

These are all of the requisite materials needed to mount a 2" x 4" x 6' Black Marine Carpeted Bunk Board onto a 2213B trailer model. This kit can also be used to mount a 2" x 4" x 7' Black Marine Carpeted Bunk Board onto a 2214B trailer model.

Materials Include:

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-PWT(DBL-PC)

Used on

General

Double PWC Trailer Fender Mounting Kit, Galvanized - PWT-2213/4G Models

This kit contains all of the requisite materials needed to mount a Galvanized Fender 13" Tire onto 2213G, 2214G, and Pre-2019 Single Axle Pontoon Boat Trailer models.

Materials Include:

2 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt

2 – 6" x 1.5" x 1.25" Galvanized Flat Plate

4 – 3/8″ Galvanized Tri-Lock Hex Nuts

MODEL: CFFNDRKIT-PWT(DBL-G)

Used on

General

Double PWC Trailer Fender Mounting Kit, Zinc-Plated - PWT-2213/4B Models

These are all of the requisite materials needed to mount a Black Powder Coated Fender 13″ Tire onto the PWT2213B, and PWT2214B trailer models.

Materials Include:

4 – 3/8″ Zinc Hex Flange Top Lock Nut

MODEL: CFFNDRKIT-PWT(DBL-PC)

Used on

General

Galvanized Axle Mounting Kit

This kit is used to mount Complete Galvanized Axles to all PWT, and Jon Boat Trailer models.

Materials Include: 

2 - 1/2" x 3" Galvanized Hex Head Bolt

2 - 1/2"-13 Galvanized Tri-Lock Nuts

MODEL: CFAXLEMNTKITG

Used on

General

Galvanized Side Mount Spare Tire Carrier

• This item is optional for all of our Galvanized Trailer models.
• It can accommodate wheels from 10" to 16.5" with a spare tire.
• It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
• The galvanized finish provides long lasting protection.
• The item can mount to trailer frames up to 3" wide and 4" high. 

*Used on Galvanized Trailer Models Only

TIEDOWN MODEL: #86098

MODEL: CFSTB-SIDE(G)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL GALVANIZED TRAILER MODELS