X
Sold Out

Galvanized Side Mount Spare Tire Carrier

$49.99

Brand Com-Fab

This product is sold out


General

Galvanized Side Mount Spare Tire Carrier

  • This item is optional for all of our Galvanized Trailer models.
  • It can accommodate wheels from 10" to 16.5" with a spare tire.
  • It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
  • The galvanized finish provides long lasting protection.
  • The item can mount to trailer frames up to 3" wide and 4" high. 

*Used on Galvanized Trailer Models Only

TIEDOWN MODEL: #86098

MODEL: CFSTB-SIDE(G)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL GALVANIZED TRAILER MODELS

More Details →
X

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

$1.49

Brand Com-Fab


General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

Locking Spare Tire Bracket, Fits 3″ Width Tubing

$14.99

Brand Com-Fab


General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X

1/2" x 2-5/8" Disc Brake Caliper Slider Pin

$7.99

Brand Com-Fab


General

Tie Down 1/2" x 2-5/8" Disc Brake Caliper Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

TIE DOWN MODEL: 44676G

MODEL: CFAXLE-PIN(SLIDER)

Used on

PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

1/2″-20 Lug Nut (Set of 5)

$14.99

Brand Com-Fab


General

1/2″-20 Lug Nut (Set of 5)

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS

More Details →
X

Black Powder Coated Side Mount Spare Tire Carrier

$49.99

Brand Com-Fab


General

Black Powder Coated Side Mount Spare Tire Carrier

  • This item is optional for all of our Black Powder Coated Trailer models.
  • It can accommodate wheels from 10" to 16.5" with a spare tire.
  • It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
  • The powder coated finish provides long lasting protection.
  • The item can mount to trailer frames up to 3" wide and 4" high.

*Used on Black Powder Coated Trailer Models Only

TIEDOWN MODEL: #86100

MODEL: CFSTB-SIDE(B)

Installation Instructions

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

Optional for

ALL BLACK POWDER COATED TRAILER MODELS

More Details →
X

3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt 

$5.99

Brand Com-Fab


General

3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt 

This item is a part of these kits:

- 2213G - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2212G - Fender Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Fender Mounting Kit

- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

TIE DOWN MODEL: #83027G

MODEL: CFUBLT3/8X2.38G

Used on

PWT-2212G
PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
More Details →
X

Angler Kayak Trailer Bunk Mounting Kit

$29.99

Brand Com-Fab


This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:

2 – 3/8”-16 x 2.06” x 2.88” Zinc U-Bolt
2 – 4" x 1" x .25" Zinc Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Serrated Zinc Flange Nut

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw


More Details →
X

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

$5.99

Brand Com-Fab


General

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.

MODEL: CFUBLT3/8X2.88G

Used on

PWT-800G
PWT-1000G
PWT-1100G
More Details →
X

4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes

$4.99

Brand Com-Fab


General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center

- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

PWT-800G
PWT-1000G
PWT-1100G
PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

$7.99

Brand Com-Fab


General

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

- This item is part of the BATIE190G Galvanized Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Axle Tubing for all PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Axle Tubing for all Pontoon Boat Trailer models.

TIE DOWN MODEL: #84404G

MODEL: CFAXLE-UBLT(2.0SQ-G)

Used on

PWT-2213G
PWT-2214G
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt

$4.99

Brand Com-Fab


General

3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt

This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.

See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit

MODEL: CFUBLT3/8X2.06X5.25Z

Used on

PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

Lug Nut Stud 1-1/2"-20

$4.99

Brand Com-Fab


General

1-1/2"-20 Lug Nut Stud

The stud material is SAE grade 8, zinc dichromate plated, with a minimum 96 hour salt spray requirement. 

1/2"-20 Lug Nut

MODEL: CFAXLE-BLT(STUD1-1/2)

Used For

ALL COM-FAB TRAILER MODELS

More Details →
X

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

$4.99

Brand Com-Fab


General

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

This item is part of these kits:

- 2213B - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212B - Fender Mounting Kit

TIEDOWN: 83027Z

MODEL: CFUBLT3/8X2.38Z

Used on

PWT-2212B
PWT-2213B
PWT-2214B
More Details →
X

9/16"-18 x 3" Shackle Bolt

$7.99

Brand Com-Fab


General

9/16"-18 x 3" Shackle Bolt

- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used to mount 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.

- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.

MODEL: CFAXLE-BLT(SHACKLE-Z)

Used on

PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

$4.99

Brand Com-Fab


General

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

    TIE DOWN MODEL: #83002Z

    MODEL: CFAXLE-UBLT(1.5SQ-Z)

    Used on

    PWT-800B
    PWT-800G
    PWT-1000B
    PWT-1100B
    PWT-2212B
    More Details →
    X

    3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt

    $5.99

    Brand Com-Fab


    General

    3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt

    This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

      TIE DOWN MODEL: #83002G

      MODEL: CFAXLE-UBLT(1.5SQ-G)

      Used on

      PWT-800G
      PWT-1000G
      PWT-1100G
      PWT-2212G
      PWT-2212B
      JBT-900
      JBT-1400
      JBT-1600
      JBT-1600 'RIVER HAWK'
      PT-1400
      More Details →
      X

      3/8”-16 x 2.06” x 2.88” Zinc U-Bolt

      $4.99

      Brand Com-Fab


      General

      3/8”-16 x 2.06” x 2.88” Zinc U-Bolt

      This item is part of the 1000B - Bunk Mounting Kit used to mount bunks onto PWT-800B, PWT-1000B, AND PWT-1100B trailer models.

      MODEL: CFUBLT3/8X2.88Z

      Used on

      PWT-800B
      PWT-1000B
      PWT-1100B
      More Details →
      X

      Plastic Padding for Canoe/Kayak Trailers and Kits

      $3.99

      Brand Com-Fab Trailers


      These are the plastic protectors for your canoes and kayaks. They ship with self tapping mounting screws depending on the length of padding.
      More Details →
      X

      8″ Galvanized Adjustable Bolster Bunk Bracket

      $7.99

      Brand Com-Fab


      General

      8″ Galvanized Adjustable Bolster Bunk Bracket

      This item is part of these kits:

      Jon Boat Trailer Bunk Mounting Kit

      Jon Boat Trailer Bow Support Mounting Kit

      'River Hawk' Jon Boat Trailer Bunk Mounting Kit

      TIE DOWN MODEL: 86130G

      MODEL: CFBRKTBLSTR

      Used on

      JBT-900
      JBT-1400
      JBT-1600
      JBT-1600 'RIVER HAWK'
      More Details →
      X

      8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes

      $6.99

      Brand Com-Fab


      General

      8.25" x 1.5" x .25" Galvanized Flat Plate w/ 7/16" Holes and 3.5" Hole Centers

      This item is part of the 2213G - Bunk Board Mounting Kit used to mount Bunk Boards onto PWT-2213G, and PWT-2214G trailer models.

      MODEL: CFFLTSTRPBUNK(DBL)G

      Used on

      PWT-2213G
      PWT-2214G
      More Details →
      X

      7/16" x 2.06" x 4.31" Galvanized U-Bolt

      $6.99

      Brand Com-Fab


      General

      7/16" x 2.06" x 4.31" Galvanized U-Bolt

      This item is part of the Kayak/Canoe Trailer Upright Mounting Kit.

      TIE DOWN MODEL: #84051G

      MODEL: CFUBLT7/16x2.06x4.31G

      Used on

      KCT-1200
      KCT-1400
      KCT-1600
      More Details →
      X

      10" Galvanized Adjustable Bolster Bunk Bracket

      $19.99

      Brand Com-Fab


      General

      10" Galvanized Adjustable Bolster Bunk Bracket

      These are optional Bolster Brackets for all Jon Boat Trailer models.

      Jon Boat Trailer Bunk Mounting Kit

      TIE DOWN MODEL: #86131G

      MODEL: CFBRKTBLSTR-10

      Optional for

      JBT-900
      JBT-1400
      JBT-1600
      JBT-1600 'RIVER HAWK'
      More Details →
      X

      4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes

      $4.99

      Brand Com-Fab


      General

      4" x 1" x .25" Zinc Flat Plate w/ 1/2" Holes and a 2.5" Hole Center

      - This item is part of the 1000B - Bunk Mounting Kit used to mount Bunk Boards onto PWT-800B, PWT-1000B, and PWT-1100B trailer models.

      MODEL: CFFLTSTRPBUNK(SGL)Z

      Used on

      PWT-800B
      PWT-1000B
      PWT-1100B
      More Details →