X

Side Mount Spare Tire Carrier

$23.50

Brand Com-Fab


Installation Instructions:

1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

2. Slide U-bolt around the frame and through the holes in tire carrier.

3. Mount with flat washers, lock washers and nuts provided.

4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

More Details →
X

TecNiq 7 Function 6" LED Tail Light (Passenger Side)

$15.99

Brand Com-Fab


General

TecNiq 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail

  • These are optional for all Trailer Models.
  • Multi-Function 6" Box Tail Light
  • Urethane Potting w/ Guaranteed Circuit Board Protection
  • Dust and water proof with hermetic seal
  • Durable impact resistant lens
  • Meets all FMVSS 108 requirements for narrow and wide vehicles
  • Reliable performance over 100,000 hours
  • Fits standard mounting as a direct replacement
  • Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
    Rear Reflector, and License Plate Light (Left)

Includes two 7/16" bolts w/ nuts for mounting.

MODEL: CFLIGHTREAR(R)-LED(TEC)

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X
Sale

TecNiq 8 Function 6" LED Tail Light (Driver Side)

$35.35 $16.99

Brand Com-Fab


General

TecNiq 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.

  • Multi-Function 6" box tail light
  • Urethane Potting w/ Guaranteed Circuit Board Protection
  • Dust and water proof with hermetic seal
  • Durable impact resistant lens
  • Meets all FMVSS 108 requirements for narrow and wide vehicles
  • Reliable performance over 100,000 hours
  • Fits standard mounting as a direct replacement
  • Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
    Rear Reflector, and License Plate Light (Left)

Includes two 7/16" bolts w/ nuts for mounting.

MODEL: CFLIGHTREAR(L)-LED(TEC)

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X
Sale

1200 lb Side Crank Swivel Jack

$52.45 $45.99

Brand Com-Fab


General

1200 lb Side Crank Swivel Jack

This item fits 3″ x 5“ tongues. It comes with a 1200 lb Side Crank Swivel Jack Mounting Kit.

MAXIMUM CAPACITY: 1200LB

PACIDIC RIM MODEL: MJ-1200B

MODEL: CFJACKSIDE

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

Trailer Safety Chain - 48"

$7.50

Brand Com-Fab


General

Trailer Safety Chain - 48"

48" 2000 LB safety chain with 3/16 in S-Hooks and latch

Used On

PWT-800B
PWT-800G
PWT-1000B
PWT-1000G
PWT-1100B
PWT-1100G
PWT-2212B
PWT-2212G
PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVER HAWK'
More Details →
X
Sale

J-71-L Jammy Marine LED Submersible Tail Light (Driver Side)

$29.35 $22.99

Brand Com-Fab


General

J-71-L Jammy Marine LED Submersible Tail Light (Driver Side)

The J-71-L Jammy Marine LED Submersible Tail Light(Left) is an LED low profile submersible combination lamp for over 80″ Wide Trailers.  The lamp comes with 13, and 17 Diode Configurations for 7 or 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light, Rear Reflex Reflector, and Side Reflex Reflector. It comes with 7/16" nuts and bolts for mounting. They use Marine Grade Tinned Wire, and Double Epoxy Sealed Design, with the lowest profile of any combination lamp on the market for protection against harsh salt water environments.

MODEL: CFLIGHTREAR(L)-LED(JAM)

Specifications

Dimensions: 6-1/4” L x 3-3/4” W x 1-7/8” H

Wiring: 8″ leads with ground ring terminal

Mount: 2 Stainless Studs w/ Supplied Nuts

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X
Sale

J-71 Jammy Marine LED Submersible Tail Light (Passenger)

$26.20 $22.99

Brand Com-Fab


General

J-71 Jammy Marine LED Submersible Tail Light (Passenger)

The J-71 Jammy Marine LED submersible tail light is an LED low profile submersible combination lamp for over 80″ Wide Trailers. These LED lamps come with 13, and 17 Diode Configurations for 7 or 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light, Rear Reflex Reflector and Side Reflex Reflector. Includes two 7/16" nuts and bolts. They use marine grade tinned wire, and double epoxy sealed design with the lowest profile of any combination lamp on the market for protection against harsh salt water environments.

MODEL: CFLIGHTREAR(R)-LED(JAM)

Specifications

Dimensions: 6-1/4” L x 3-3/4” W x 1-7/8” H

Wiring: 8″ leads with ground ring terminal

Mount: 2 Stainless Studs w/ Supplied Nuts

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X

2″ Steel Super Lube Grease Dust Cap & Plug

$3.99

Brand Com-Fab


General

2″ Steel Super Lube Grease Dust Cap & Plug for Axle Hub

This item is a part of all hub assemblies.

Galvanized 5-Bolt Hub Assembly

Powder Coated Black 5-Bolt Hub Assembly

TIE DOWN MODEL: #17093

MODEL: CFAXLE-CAP&PLUG

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

4.80 x 12″ C Load Range Galvanized Tire & Wheel

$54.99

Brand Com-Fab


General

4.80 x 12″ C Load Range Galvanized Finish Tire & Wheel

This is the tire and wheel used on PWT-800, PWT-1000, PWT-1100, PWT-2212, and all Jon Boat Trailer models.

MODEL: CFT48012G

Used on

PWT-800G
PWT-1000G
PWT-1100G
PWT-2212G
JBT-900
JBT-1400
JBT-1600
More Details →
X

Dry Launch SP7 Red Tail Light (Driver Side)

$14.99

Brand Com-Fab


General

Dry Launch SP7 Red Tail Light (Driver Side)

The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.

Dimensions:  W = 6.75"   H = 3.5"   D = 2-1/4"

Materials Include:

2 - 1/4″ - 18 Tail Light Bolt

2 - 1/4" -18 Zinc Nut

MODEL: CFLIGHTREAR(L)

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X
Sale

Dry Launch SP7 Red Tail Light (Passenger Side)

$18.38 $14.99

Brand Com-Fab


General

Dry Launch SP7 Red Tail Light (Passenger Side)

The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.

Dimensions:  W = 6.75"   H = 3.5"   D = 2-1/4"

Materials Include:

2 - 1/4″-18 Tail Light Bolt

2 - 1/4"-18 Zinc Nut

MODEL: CFLIGHTREAR(R)

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X
Sale

900 lb Capacity Crank Winch with Strap and Hook DL 900

$31.99 $29.99

Brand Com-Fab


General

Dutton-Lainson 900 lb Capacity Crank Winch

This item is a heavy duty winch used for horizontal pulling applications. It contains high carbon steel gears, permanently lubricated bearings, and a zinc tuffplate finish. A 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a Dutton-Lainson 900 lb Winch Handle. The mounting materials are sold separately.

Mounting Kit Includes:

2 - 3/8"-16 x 1" Zinc Hex Head Cap Bolt

2 - 3/8"-16 Serrated Zinc Flange Nuts

MODEL: CFWNCH900DL

Used on

PWT-1000B
PWT-1000G
PWT-1100B
PWT-1100G
PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
More Details →
X

Weld Aid B-100 Brite Zinc Aerosol Spray Can

$9.99

Brand Com-Fab


General

Weld Aid B-100 Brite Zinc Aerosol Spray Can

This product is used to touch up, and prevent rust and corrosion on all of our galvanized items for sale. The spray is 69% Zinc Metal ensuring that it matches the shine of any and all Hot-Dipped Galvanized Steel. It has a special no clog nozzle, and can cover up to 40 sq feet of steel. This item meets ASTM-A780 requirements for corrosion protection.

Read the Safety Instructions carefully before use of this item.

https://weldaid.com/wp-content/uploads/2018/11/1008302E.pdf

Specifications

Part No: B-100

UPC: 731592100013

Volume: 12.5 oz Primer

More Details →
X

1500 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs HF 50.5 SC 41.18

$249.99

Brand Com-Fab


General

1500 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing 

2 - Black Powder Coated 5-Bolt Hub Assembly

2 - 3-Leaf Slipper Springs (750 lb)

1 - Zinc Tie Plate Kit

This item is mounted to the PWT-1000B, and the PWT-1100B with a Black Powder Coated Axle Mounting Kit.

MODEL: CFAXLE1500B

Specifications

Tubing: 1.5" Black Powder Coated Square Axle

Load Rating: 1500 lb

Hub Face: 50.5"

Spring Center: 41.188"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on

PWT-1000B
PWT-1100B
More Details →
X

1500 lb Galvanized PWC Trailer Axle w/ Hubs and Springs HF 50.5 SC 41.18

$259.99

Brand Com-Fab


General

1500 lb Galvanized PWC Trailer Axle w/ Hubs and Springs

*NOTE: If your trailer is older than 2006, call before ordering to ensure you receive the correct axle*

Materials Include:

1 - 44.5" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing 

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Slipper Springs (750 lb)

1 - Galvanized Tie Plate Kit

This item is mounted to the PWT-1000G, and PWT-1100G trailer models with a Galvanized Axle Mounting Kit.

MODEL: CFAXLE1500G

Specifications

Tubing: 1.5" Galvanized Square Axle

Load Rating: 1500 lb

Hub Face: 50.5"

Spring Center: 41.188"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on

PWT-1000G
PWT-1100G
More Details →
X

5-Leaf Slipper Springs 1,250 lb Capacity

$32.99

Brand Com-Fab


General

5-Leaf Slipper Springs 1,250 lb Maximum Capacity

- This item is mounted to the 2500 lb Galvanized Trailer Axle with a BATIE190G Galvanized Tie Plate Kit.

- This item is mounted to the 2500 lb Black Powder Coated Trailer Axle with a BATIE190Z Zinc Tie Plate Kit.

TIE DOWN MODEL: #13086

MODEL: CFAXLE5-LSPRNG(SF)

Specifications

Length: 24.63"

Leaf Width: 1.75"

Arch Height: 4.50"

Bushing Type: Nylon

Used on

PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
More Details →
X

13″ Silver E-Coat Tire & Wheel ST175/80D13 C Load Range

$89.99

Brand Com-Fab


General

ST175/80D13 C Load Range, 13″ Silver E-Coat Finish Tire & Wheel 65 psi

This item is used on PWT-2213B, and PWT-2214B trailer models.

MODEL: CFT175DLRC-S

Used on

PWT-2213B
PWT-2214B
More Details →
X

Dry Launch 60″ Red Triple Light Bar

$14.99

Brand Com-Fab


General

Dry Launch 60″ Red Triple Light Bar

This light bar can be mounted to all Double PWT, and Pontoon Boat Trailer models. It is secured with two 12 x 3/4″ Zinc Hex Washer Head Tek #3 Screws.

MODEL: CFLIGHTBAR-60

Optional for

PWT-2212B
PWT-2212G
PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
More Details →
X

13″ Galvanized Tire & Wheel ST175/80D13 C Load Range

$105.00

Brand Com-Fab


General

ST175/80D13 C Load Range 13″ Galv. Tire & Wheel 65 psi

This item is used on PWT-2213G, PWT-2214G, and all Pontoon Boat Trailer models.

MODEL: CFT175DLRC-G

Used on

PWT-2213G
PWT-2214G
PT-1618
PT-1820
More Details →
X
Sale

Dry Launch Amber Side Marker Light w/ 90″ of Wire

$6.99 $5.25

Brand Com-Fab


General

Dry Launch Amber Side Marker Light w/ 90" of Wire, and a 1/4" Nut

This item is a Dry Launch 203 Series with a snap out bulb slide. These bulbs can be changed without tools and mounted with a single stud. This Side Marker Light can be mounted to fenders on PWT-2213, and PWT-2214 trailer models

MODEL: CFLIGHTSDMRKR-90

Optional for

PWT-2213B
PWT-2213G
PWT-2214B
PWT-2214G
More Details →
X

32″ Galvanized Winch Assembly w/ DL 900

$112.50

Brand Com-Fab


General

32″ Galvanized Winch Assembly w/ DL 900 Winch

This assembly includes:

32" Galvanized Winch Post

Dutton-Lainson 900 lb Capacity Crank Winch

Winch Poly Bow Roller Assembly

Galvanized Winch Assembly Mounting Kit

MODEL: CFWNCH2213

Used on

PWT-2213G
PWT-2214G
JBT-900
JBT-1400
JBT-1600
JBT-1600 'RIVERHAWK'
More Details →
X

14″ Black Powder Coated Winch Assembly w/ DL 900 lb Winch

$99.99

Brand Com-Fab


General

14″ Black Powder Coated Winch Assembly w/ DL 900 lb Winch

This assembly includes a 14" Black Powder Coated Winch Post, a 900 lb Capacity Dutton-Lainson Crank Winch w/ Handle, a Winch Poly Bow Roller Assembly, and a Black Powder Coated Winch Assembly Mounting Kit.

Mounting Hardware Includes:

2 – 3/8″ x 3.06" x 4.5″ Zinc U-Bolt
2 – 5"x 1.25" x .25" Zinc Flat Plate
4 – 3/8″ Serrated Zinc Flange Nuts

MODEL: CFWNCH1000B

Used on

PWT-800B
PWT-1000B
PWT-1100B
More Details →
X

14″ Galvanized Winch Assembly w/ DL 900

$109.99

Brand Com-Fab


General

14″ Galvanized Winch Assembly w/ DL 900 lb Winch

This assembly includes a 14" Galvanized Winch Post, a Dutton-Lainson 900 lb Capacity Crank Winch, a Winch Poly Bow Roller Assembly, and a Galvanized Winch Assembly Mounting Kit.

Mounting Hardware Includes:

4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts

MODEL: CFWNCH1000G

Used on

PWT-800G
PWT-1000G
PWT-1100G
More Details →
X

17' Wire Harness Assembled w/ Protective Sleeve

$19.99

Brand Com-Fab


General

17' Wire Harness Assembled w/ Protective Sleeve

The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

MODEL: CFWH16

Used on

JBT-900
PWT-1000B
PWT-1000G
PWT-1100B
PWT-1100G
More Details →