X

1/4″ Zinc Nut for Tail Light

$0.49

Brand Com-Fab


General

1/4″ Zinc Nut for Tail Light

Two of them are used with 1/4″-18 Tail Light Bolts to mount Dry Launch SP7 Tail Lights to all Com-Fab Trailer models.

MODEL: CFNUT7/16LIGHT

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

1/4″-18 Tail Light Bolt

$0.50

Brand Com-Fab


General

Two of these are used to mount Dry Launch Submersible Tail Lights (SP7) to all Com-Fab trailer models.

Dry Launch SP7 Red Left Tail Light

Dry Launch SP7 Red Right Tail Light

MODEL: CFBLTLIGHT

Used On

ALL COM-FAB TRAILER MODELS

More Details →
X

12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw

$0.15

Brand Com-Fab


General

12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw

- Two of these are used to mount 60" Red Triple Light ID Bars onto all Double PWT, and Pontoon Boat Trailer models.

- These are also used to mount brake lines to axles w/ 7/16" Black Cable Clamps.

    MODEL: CFSCRWMETAL-TEK12

    Used on

    PWT-2212B
    PWT-2212G
    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    14' Wire Harness Assembled w/ Protective Sleeve

    $14.99

    Brand Com-Fab


    General

    14' Wire Harness Assembled w/ Protective Sleeve

    The wiring is pulled through the PWT-800 trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

    MODEL: CFWH14

    Used on

    PWT-800B
    PWT-800G
    More Details →
    X

    17' Wire Harness Assembled w/ Protective Sleeve

    $19.99

    Brand Com-Fab


    General

    17' Wire Harness Assembled w/ Protective Sleeve

    The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

    MODEL: CFWH16

    Used on

    JBT-900
    PWT-1000B
    PWT-1000G
    PWT-1100B
    PWT-1100G
    More Details →
    X

    21' Wire Harness Assembled w/ Protective Sleeve

    $22.99

    Brand Com-Fab


    General

    21' Wire Harness Assembled w/ Protective Sleeve

    The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

    MODEL: CFWH20

    Used on

    PWT-2212B
    PWT-2212G
    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    JBT-900
    JBT-1400
    JBT-1600

    JBT-1600 ‘RIVER HAWK’

    More Details →
    X

    3/8 20″ Protective Sleeve for Wiring

    $1.99

    Brand Com-Fab


    General

    This item is used as a protective sleeve for the wiring of all Com-Fab trailer models without brakes.

    14' Wire Harness Assembled w/ Protective Sleeve

    17' Wire Harness Assembled w/ Protective Sleeve

    21' Wire Harness Assembled w/ Protective Sleeve

    35' Wire Harness Assembled w/ Protective Sleeve

    MODEL: CFLOOM-20

    Used on

    ALL COM-FAB TRAILER MODELS W/O BRAKES

    More Details →
    X

    35' Wire Harness Assembled w/ Protective Sleeve

    $29.99

    Brand Com-Fab


    General

    35' Wire Harness Assembled w/ Protective Sleeve

    The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

    MODEL: CFWH35

    Used on

    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    Dry Launch 60″ Red Triple Light Bar

    $14.99

    Brand Com-Fab


    General

    Dry Launch 60″ Red Triple Light Bar

    This light bar can be mounted to all Double PWT, and Pontoon Boat Trailer models. It is secured with two 12 x 3/4″ Zinc Hex Washer Head Tek #3 Screws.

    MODEL: CFLIGHTBAR-60

    Optional for

    PWT-2212B
    PWT-2212G
    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    Dry Launch Amber Side Marker Light w/ 10" of Wire

    $4.88

    Brand Com-Fab


    General

    Dry Launch Amber Side Marker Light w/ 10" of Wire

    This item is a Dry Launch 203 Series with a snap out bulb slide. You can change the bulb without tools, and mount it with a single stud. It can be used as a Side Marker Light for the tongue of all Pontoon Boat Trailer models.

    MODEL: CFLIGHTSDMRKR-10

    Optional for

    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X
    Sale

    Dry Launch Amber Side Marker Light w/ 90″ of Wire

    $6.99 $5.25

    Brand Com-Fab


    General

    Dry Launch Amber Side Marker Light w/ 90" of Wire, and a 1/4" Nut

    This item is a Dry Launch 203 Series with a snap out bulb slide. These bulbs can be changed without tools and mounted with a single stud. This Side Marker Light can be mounted to fenders on PWT-2213, and PWT-2214 trailer models

    MODEL: CFLIGHTSDMRKR-90

    Optional for

    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    More Details →
    X

    Dry Launch SP7 Red Tail Light (Driver Side)

    $14.99

    Brand Com-Fab


    General

    Dry Launch SP7 Red Tail Light (Driver Side)

    The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.

    Dimensions:  W = 6.75"   H = 3.5"   D = 2-1/4"

    Materials Include:

    2 - 1/4″ - 18 Tail Light Bolt

    2 - 1/4" -18 Zinc Nut

    MODEL: CFLIGHTREAR(L)

    Optional for

    ALL COM-FAB TRAILER MODELS

    More Details →
    X
    Sale

    Dry Launch SP7 Red Tail Light (Passenger Side)

    $18.38 $14.99

    Brand Com-Fab


    General

    Dry Launch SP7 Red Tail Light (Passenger Side)

    The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.

    Dimensions:  W = 6.75"   H = 3.5"   D = 2-1/4"

    Materials Include:

    2 - 1/4″-18 Tail Light Bolt

    2 - 1/4"-18 Zinc Nut

    MODEL: CFLIGHTREAR(R)

    Optional for

    ALL COM-FAB TRAILER MODELS

    More Details →
    X
    Sale

    J-71 Jammy Marine LED Submersible Tail Light (Passenger)

    $26.20 $22.99

    Brand Com-Fab


    General

    J-71 Jammy Marine LED Submersible Tail Light (Passenger)

    The J-71 Jammy Marine LED submersible tail light is an LED low profile submersible combination lamp for over 80″ Wide Trailers. These LED lamps come with 13, and 17 Diode Configurations for 7 or 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light, Rear Reflex Reflector and Side Reflex Reflector. Includes two 7/16" nuts and bolts. They use marine grade tinned wire, and double epoxy sealed design with the lowest profile of any combination lamp on the market for protection against harsh salt water environments.

    MODEL: CFLIGHTREAR(R)-LED(JAM)

    Specifications

    Dimensions: 6-1/4” L x 3-3/4” W x 1-7/8” H

    Wiring: 8″ leads with ground ring terminal

    Mount: 2 Stainless Studs w/ Supplied Nuts

    Optional for

    ALL COM-FAB TRAILER MODELS

    More Details →
    X
    Sale

    J-71-L Jammy Marine LED Submersible Tail Light (Driver Side)

    $29.35 $22.99

    Brand Com-Fab


    General

    J-71-L Jammy Marine LED Submersible Tail Light (Driver Side)

    The J-71-L Jammy Marine LED Submersible Tail Light(Left) is an LED low profile submersible combination lamp for over 80″ Wide Trailers.  The lamp comes with 13, and 17 Diode Configurations for 7 or 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light, Rear Reflex Reflector, and Side Reflex Reflector. It comes with 7/16" nuts and bolts for mounting. They use Marine Grade Tinned Wire, and Double Epoxy Sealed Design, with the lowest profile of any combination lamp on the market for protection against harsh salt water environments.

    MODEL: CFLIGHTREAR(L)-LED(JAM)

    Specifications

    Dimensions: 6-1/4” L x 3-3/4” W x 1-7/8” H

    Wiring: 8″ leads with ground ring terminal

    Mount: 2 Stainless Studs w/ Supplied Nuts

    Optional for

    ALL COM-FAB TRAILER MODELS

    More Details →
    X

    Jammy J-56-A 3/4" Single Diode PC Side Marker Light

    $4.99

    Brand Com-Fab


    General

    Jammy J-56-A 3/4" Single Diode PC Side Marker Light

    The Jammy diode side marker light is a 3/4″ Round Single Diode, Amber-Colored LED Marker Light (PC Rated) that mounts in 3/4″ diameter holes. This model includes a mounting grommet, and 6″ leads with blunt cut ends.

    MODEL: CFLIGHTSDMRKR-LED(J-56-A)

    More Details →
    X

    Jammy LED Lightbar w/ 3 wires

    $12.99

    Brand Com-Fab


    General

    Jammy LED Lightbar w/ 3 wires

    This item is a Styleside LED ID/Tribar with 3 Diode Configuration. All of the lamps are wired for ID, and optional 3rd Brake Functions.

    JAMMY MODEL: J-5353-R3

    MODEL: CFLIGHTBAR-LED(J-5353-R3)

    Specifications

    Length: 15-1/2″

    Height:1-5/8″

    Diameter: 3/4″

    Wiring: 15″ Leads

    Mount: Comes with 2 Screws

    Optional for

    PWT-2212B
    PWT-2212G
    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    TecNiq 7 Function 6" LED Tail Light (Passenger Side)

    $15.99

    Brand Com-Fab


    General

    TecNiq 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail

    • These are optional for all Trailer Models.
    • Multi-Function 6" Box Tail Light
    • Urethane Potting w/ Guaranteed Circuit Board Protection
    • Dust and water proof with hermetic seal
    • Durable impact resistant lens
    • Meets all FMVSS 108 requirements for narrow and wide vehicles
    • Reliable performance over 100,000 hours
    • Fits standard mounting as a direct replacement
    • Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
      Rear Reflector, and License Plate Light (Left)

    Includes two 7/16" bolts w/ nuts for mounting.

    MODEL: CFLIGHTREAR(R)-LED(TEC)

    Used on

    ALL COM-FAB TRAILER MODELS

    More Details →
    X
    Sale

    TecNiq 8 Function 6" LED Tail Light (Driver Side)

    $35.35 $16.99

    Brand Com-Fab


    General

    TecNiq 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.

    • Multi-Function 6" box tail light
    • Urethane Potting w/ Guaranteed Circuit Board Protection
    • Dust and water proof with hermetic seal
    • Durable impact resistant lens
    • Meets all FMVSS 108 requirements for narrow and wide vehicles
    • Reliable performance over 100,000 hours
    • Fits standard mounting as a direct replacement
    • Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
      Rear Reflector, and License Plate Light (Left)

    Includes two 7/16" bolts w/ nuts for mounting.

    MODEL: CFLIGHTREAR(L)-LED(TEC)

    Used on

    ALL COM-FAB TRAILER MODELS

    More Details →
    X

    TecNiq Amber LED Mini PC Side Marker Light w/ Ground Wire

    $3.75

    Brand Com-Fab


    General

    TecNiq Amber LED Mini PC Side Marker Light w/ Ground Wire

    • Comes with a 1/4" Nut.
    • Brilliant illumination in a compact size
    • IP 68 Rated - Dust and water proof
    • TecSeal Urethane Potting - Guaranteed Circuit Board Protection
    • Stud-mounted, no visible fasteners
    • Reliable performance over 100,000 hours
    • Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications 

    Tecniq Part No. S14-AAS0-1

    MODEL: CFLIGHTSDMRKR-LED(TEC-A24)

    Used on 

    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    TecNiq Red LED Mini PC Side Marker Light w/ Ground Wire

    $3.75

    Brand Com-Fab


    General

    TecNiq Red LED Mini PC Side Marker Light w/ Ground Wire

    • Comes with a 1/4" Nut.
    • Brilliant illumination in a compact size
    • IP 68 Rated - Dust and water proof
    • TecSeal Urethane Potting - Guaranteed Circuit Board Protection
    • Stud-mounted, no visible fasteners
    • Reliable performance over 100,000 hours
    • Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications 

    TecNiq Part No. S14-RRS1-1

    MODEL: CFLIGHTSDMRKR-LED(TEC-R24)

    Used on 

    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →
    X

    TecNiq Red LED V-Shaped Light Bar w/ 58" Lead

    $14.99

    Brand Com-Fab


    General

    TecNiq Red LED V-Shaped Light Bar w/ 58" Lead

    • Used on all Double PWT Trailer models.
    • Screws included with purchase
    • Fully submersible LED Identification bar
    • TecSeal Urethane Potting - Guaranteed Circuit Board Protection
    • Durable impact resistant lens
    • Available in colored or clear impact resistant lens
    • IP68 rating while exceeding FMVSS 108 standards
    • Reliable performance over 100,000 hours

    MODEL: CFLIGHTBAR-LED(V-TEC)

    Used On

    PWT-2212B
    PWT-2212G
    PWT-2213B
    PWT-2213G
    PWT-2214B
    PWT-2214G
    More Details →
    X

    TecNiq Red Low Profile ID Light Bar w/ Ground Terminal

    $16.99

    Brand Com-Fab


    General

    Red Low Profile ID Light Bar w/ Ground Terminal

    • Used on all Pontoon Trailer models
    • Screws included with purchase
    • Meets all FMVSS 108 requirements for wide and narrow vehicles
    • IP68 Rated - Dust and water proof with hermetic seal
    • TecSeal Urethane Potting - Guaranteed Circuit Board Protection
    • Durable impact resistant lens
    • Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
    • Reliable performance over 100,000 hours
    • Can be mounted horizontal, vertical, or at any angle

    TecNiq Model No. T10-RR00-1

    MODEL: CFLIGHTBAR-LED(S-TEC)

    Used On

    PT-1400
    PT-1618
    PT-1820
    PT-2022
    PT-2224
    PT-2426
    More Details →