Products

General

Tie Down 1/2" x 2-5/8" Disc Brake Caliper Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

TIE DOWN MODEL: 44676G

MODEL: CFAXLE-PIN(SLIDER)

Used on

General

1/2" Zinc Nylock Nut

This item is part of the BATIE190Z Zinc Tie Plate Kit used to mount 3-Leaf Slipper Springs (750 lb) to Black Powder Coated 2.0" Square Axle Tubing.

MODEL: CFAXLE-NUT(1/2NYLOCK-Z)

Used on

General

1/2" Zinc Nylock Nut for Dutton-Lainson 900 Winch Handle

This item is used to mount DL900 Winch Handles onto DL900 Crank Winches.

DUTTON-LAINSON PRODUCT ID: 204803

MODEL: CFNUT1/2HANDLE(DL)

Used on

General

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

- This item is part of the BATIE190G Galvanized Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Axle Tubing for all PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Axle Tubing for all Pontoon Boat Trailer models.

TIE DOWN MODEL: #84404G

MODEL: CFAXLE-UBLT(2.0SQ-G)

Used on

General

1/2"-13 x 2.06" x 4.31" Zinc U-Bolt

This item is part of the BATIE190Z Tie Plate Kit used to secure 5-Leaf Slipper Springs (1,250 lb) to 2" Square Black Powder Coated Axle Tubing. These can also be used with a Tie Down 7000# Zinc Axle Tie Plate.

TIE DOWN MODEL: #84404Z

MODEL: CFAXLE-UBLT(2.0SQ-Z)

Used on

General

1/2″-13 x 3″ Galvanized Hex Head Bolt

Two of these Galvanized Hex Head Bolts are part of the Galvanized Axle Mounting Kit used to mount Galvanized Axles onto all Galvanized PWT, and Jon Boat Trailer models.

MODEL: CFBLT1/2X3G

Used on

General

1/2"-13 x 3.06" x 5.31" Galvanize U-Bolt

This item is used with 1/2"-13 Galvanized Tri-Lock Nuts, and 1/2" SAE Galvanized Flat Washers to mount Pontoon/Tritoon Model Trailer Winch Stands to all Pontoon/Tritoon Trailer models. It is part of the Pontoon Trailer Winch Assembly Mounting Kit.

MODEL: CFUBLT1/2x3.06x5.31G

Used On

PT-1618
PT-1820
PT-2022
PT-2224
PT-2426

General

1/2″-13 x 3″ Zinc Hex Head Cap Bolt

Two of these are part of the Black Powder Coated Axle Mounting Kit used to mount Black Powder Coated Axles to all Black Powder Coated Trailer models.

MODEL: CFBLT1/2X3Z

Used on

General

1/2″ Zinc Flat Washer

Two of these are used with a 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt, a 1/2" Zinc Top Lock Nut, a 3" Poly Bow Roller, and 3" Bell Ends to create a 3" Poly Bow Roller Assembly.

MODEL: CFWSHR1/2Z

Used on

General

1/2″- 13 Thread Galvanized Tri-Lock Nut

- This item is part of the Galvanized Axle Mounting Kit used to mount all galvanized axles to galvanized trailer frames.

- This item is part of the BATIE190G Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Square Axles for the PWT-2213G, and the PWT-2214G trailer models. 

-This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Square Axles for all Pontoon Boat Trailer models.

MODEL: CFNUT1/2TRILOCK

Used on

General

1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt

This item is used with 1/2" Zinc Flat Washers, a 1/2" Zinc Top Lock Nut, a 3" Poly Keel Roller, and 3" Bell Ends to create a 3" Poly Bow Roller Assembly. 

See also: Winch Poly Bow Roller Assembly

MODEL: CFBLT1/2X4.5

Used on

General

1/2″-13 x 4″ Zinc Hex Head Cap Bolt

These are used with 1/2" Zinc Top Lock Nuts to mount Couplers to all trailer models. 

See: Coupler Mounting Kit

MODEL: CFBLT1/2X4Z

Used on

ALL COMFAB TRAILER MODELS

General

1/2″-13 Zinc Hex Flange Top Lock Nut 

These are used with 1/2″ x 3″ Zinc Hex Head Cap Bolts to mount all black powder coated axles to black powder coated trailer frames.

See: Black Powder Coated Axle Mounting Kit

MODEL: CFNUT1/2LOCKFLANGEZ

Used on

General

1/2″-13 Zinc Top Lock Nut

These are used with 1/2″-13 x 4″ Zinc Hex Head Cap Bolts to mount a Coupler to all Com-Fab trailer frames. These are also used with 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolts, 1/2" Zinc Washers, a 3" Poly Bow Roller, and 3" Bell Ends to form a 3" Poly Bow Roller Assembly.

See also: Winch Poly Bow Roller Assembly

                5" Poly Keel Roller Assembly

MODEL: CFNUT1/2LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

1/2″-16 x 6″ Zinc Hex Head Cap Bolt

This item is used with a 1/2" Zinc Top Lock Nut to mount a 5" Poly Keel Roller onto Keel Roller Brackets to form part of the 5" Poly Keel Roller Assembly.

MODEL: CFBLT1/2X6Z

Used on

General

1/2″-20 Lug Nut

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COMFAB TRAILER MODELS

General

1/4″ Zinc Nut for Tail Light

Two of them are used with 1/4″-18 Tail Light Bolts to mount Dry Launch SP7 Tail Lights to all Com-Fab Trailer models.

MODEL: CFNUT7/16LIGHT

Used on

ALL COM-FAB TRAILER MODELS

General

Two of these are used to mount Dry Launch Submersible Tail Lights (SP7) to all Com-Fab trailer models.

Dry Launch SP7 Red Left Tail Light

Dry Launch SP7 Red Right Tail Light

MODEL: CFBLTLIGHT

Used On

ALL COM-FAB TRAILER MODELS

General

10" Galvanized Adjustable Bolster Bunk Bracket

These are optional Bolster Brackets for all Jon Boat Trailer models.

Jon Boat Trailer Bunk Mounting Kit

TIE DOWN MODEL: #86131G

MODEL: CFBRKTBLSTR-10

Optional for

General

12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw

- Two of these are used to mount 60" Red Triple Light ID Bars onto all Double PWT, and Pontoon Boat Trailer models.

- These are also used to mount brake lines to axles w/ 7/16" Black Cable Clamps.

MODEL: CFSCRWMETAL-TEK12

Used on

General

12.5" Galvanized Adjustable Keel Roller Bracket

Two of these are used with:

1 – 5" Poly Keel Roller
1 – 1/2″ Zinc Top Lock Nut

to create Keel Poly Roller Assemblies for JBT-1600 Frames.

TIE DOWN MODEL: #44017

MODEL: CFBRKTKEEL

Used on

General

3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes

These are used to mount 2900 lb Idler Trailer Axles, or 3500 lb Hydraulic Disc Brake Trailer Axles to frames on all Single, and Tandem Axle setups for Pontoon Boat trailers.

Pontoon Boat Trailer Single Axle Mounting Kit

Pontoon Boat Trailer Tandem Axle Mounting Kit

TIE DOWN MODEL: #44536

MODEL: CFAXLELINK(Z)

Used on

General

3/8"-16 x 1" Galvanized Hex Head Cap Bolt

This item is typically used with a 3/8"-16 Galvanized Tri-Lock Nut.

This item is part of these kits:

- 2213G Bunk Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Bow Support Bunk Mounting Kit

- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBLT3/8X1G

Used on

General

3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt

This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

TIE DOWN MODEL: #83002G

MODEL: CFAXLE-UBLT(1.5SQ-G)

Used on