Products

General

3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link

These are used to mount 2900 lb Idler Trailer Axles, or 3500 lb Hydraulic Disc Brake Trailer Axles to frames on all Single and Tandem Axle setups for Pontoon Boat trailers, and are frequently used in conjunction with axle equalizers.

Pontoon Boat Trailer Single Axle Mounting Kit

Pontoon Boat Trailer Tandem Axle Mounting Kit

TIE DOWN MODEL: #44536

MODEL: CFAXLELINK(Z)

Used on

General

3/16" S-Hook with Latch Trailer Safety Chain - 48"

48" 2000 LB safety chain with 3/16 in S-Hooks and latch

MODEL: CFSFTYCHN

Used On

General

3/8" Black Cable Clamp for Brake Lines

This item is secured onto the axle w/ use of a 12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw. The item is used for securing all brake lines to axles on Pontoon Boat Trailer models w/ Brakes.

MODEL: CFBRKECBLCLAMP

Used on

3/8"-16 Thread Stainless Steel Nylock Hex Nuts

MODEL: CFNUT3/8NYLOCK-SS

General

3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles

This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

TIE DOWN MODEL: #83002G

MODEL: CFAXLE-UBLT(1.5SQ-G)

Used on

General

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt - For Standard 1.5" SQ Tubing Axles

This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

TIE DOWN MODEL: #83002Z

MODEL: CFAXLE-UBLT(1.5SQ-Z)

Used on

General

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.

MODEL: CFUBLT3/8X2.88G

Used on

General

3/8"-16 Zinc Hex Flange Top Lock Nut Zinc

This item is part of the:

– 1000B - Bunk Mounting Kit

– 2212B - Fender Mounting Kit

– 2213B - Fender Mounting Kit

– Winch Poly Bow Roller Assembly

– Pontoon Boat Trailer Winch Assembly

MODEL: CFNUT3/8LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

3/8”-16 x 2.06” x 2.88” Zinc U-Bolt

This item is part of the 1000B - Bunk Mounting Kit used to mount bunks onto PWT-800B, PWT-1000B, AND PWT-1100B trailer models.

MODEL: CFUBLT3/8X2.88Z

Used on

General

3/8″-16 x 1″ Zinc Hex Head Cap Bolt

This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models. 

MODEL: CFBLT3/8X1Z

Used on

ALL COM-FAB TRAILER MODELS

General

3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt

This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.

See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit

MODEL: CFUBLT3/8X2.06X5.25Z

Used on

General

3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt 

This item is a part of these kits:

- 2213G - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2212G - Fender Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Fender Mounting Kit

- 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

TIE DOWN MODEL: #83027G

MODEL: CFUBLT3/8X2.38G

Used on

General

3/8″-16 x 3.06" x 2.38″ Zinc U-Bolt

This item is part of these kits:

- 2213B - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212B - Fender Mounting Kit

TIEDOWN: 83027Z

MODEL: CFUBLT3/8X2.38Z

Used on

General

3/8″-16 x 3.06" x 4.5″ Galvanized U-Bolt

This item is part of these kits:

- Galvanized Winch Assembly Mounting Kit

- Jon Boat Trailer Bow Support Bunk Mounting Kit

MODEL: CFUBLT3/8X4.5G

Used on

General

3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt

This item is part of the 2213G - Fender Mounting Kit used to mount fenders to PWT-2213G, PWT-2214G, and all Pontoon Boat Trailer models.

MODEL: CFUBLT3/8X3.00G

Used on

General

3/8″-16 x 4.19″ x 3″ Zinc U-Bolt

This item is part of the 2213B - Fender Mounting Kit used to mount fenders to PWT-2213B, and PWT-2214B trailer models.

MODEL: CFUBLT3/8X3.00Z

Used on

General

32" Galvanized Jon Boat Trailer Winch Assembly w/ RAM 600LB Winch

This assembly includes:

- 32" Galvanized Winch Post 

- RAM 600 lb Capacity Crank Winch

- Winch Poly Bow Roller Assembly

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFWNCHJBTG

Used on

General

32" Powder Coat Solar Flat Matte Black Winch Post

This item is part of the 32" Powder Coat Solar Flat Matte Black Winch Post that mounts to the PWT-2214B trailer models with Zinc U Bolt Winch Assembly for Black Powder Coated Trailers.

MODEL: CFWNCHPOST(PWC-32)-B (SOLAR)

Used on

General

32IN Powder Coat Solar Flat Matte Black Winch Assembly w/ 600LB DL Winch

Materials Include

1 - 32" Powder Coat Solar Flat Matte Black Winch Post

1 - 600 lb Capacity Dutton-Lainson Crank Winch w/ Handle

1 - Winch Poly Bow Roller Assembly

1 - Black Powder Coated Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat.

MODEL: CFWNCHASSM-2214B (SOLAR)

Used on

General

32″ Galvanized Winch Post

- This item is part of the 32″ Galvanized Winch Assembly which is mounted to the PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 32" Galvanized Jon Boat Trailer Winch Assembly which is mounted every Jon Boat Trailer model.

MODEL: CFWNCHPOST32-G

Used on

General

32″ Galvanized Winch Assembly w/ Dutton-Lainson 600LB Winch

This assembly includes:

- 32" Galvanized Winch Post

- Dutton-Lainson 600 lb Capacity Crank Winch

- Winch Poly Bow Roller Assembly

- Galvanized Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat.

MODEL: CFWNCH2213

Used on

General

35' 4-Pin Wire Harness Assembled w/ Protective Sleeve

The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" Ring Terminal.

MODEL: CFWH35

Used on

General

Kayak/Canoe Trailer Upright Mounting Kit

This kit is used to mount uprights on all 3IN tubing Trailer Models.

This kit includes:

2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt

4 – 3/8″ Galvanized USS Flat Washer

4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts

General

4 Capacity Canoe/Kayak Conversion Kit

Universal canoe/kayak trailer conversion kit for up to 4 kayaks or 4 canoes without plastic protective covering.

One size fits all trailer kit:

- Designed to hold 4 regular sized kayaks or canoes

- Fits on 1.5", 2", 3" rectangular and/or square tubing where applicable.

- 2x2x11 gauge upright bracing for universal fit.

- 2x2x14 gauge cross braces with stability slides, preventing side-to-side movement. (Optional)

This is a conversion kit only and requires a separate trailer to mount.

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf

Specifications

4 Capacity Normal Kayak Kit - CFKIT-KAY(4S)

• 2x 30" Uprights 
• 4x 60" Crossbeams with Strap Assist and End Caps
• 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
• 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
• 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
• 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  
• 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
• 8x Turned Eye Bolts for use with Tie Downs
• 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Tall Kayak Kit - CFKIT-KAY(4T)

• 2x 40" Uprights
• 4x 60" Crossbeams with Strap Assist and End Caps
• 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
• 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
• 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
• 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  
• 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
• 8x Turned Eye Bolts for use with Tie Downs
• 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Normal Canoe Kit - CFKIT-CAN(4S)

• 2x 40" Uprights 
• 4x 80" Crossbeams with Strap Assist and End Caps
• 4x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
• 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
• 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
• 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  
• 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
• 8x Turned Eye Bolts for use with Tie Downs
• 16x Galvanized Lock Nuts for locking in Eye Bolts

4 Capacity Tall Canoe Kit - CFKIT-CAN(4T)

• 2x 48" Uprights 
• 4x 80" Crossbeams with Strap Assist and End Caps
• 2x Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
• 8x Zinc Bolt and Nut to Tighten Crossbeam to Mounting Bracket
• 8x Zinc U Bolts with Washer and Nut for Securing Crossbeams
• 4x Galvanized U Bolts with Washer and Nut for Securing Uprights to 1.5" & 2" Tubing
  
• 4x Galvanized U Bolts with Washer and nut for Securing Uprights to 3" wide Tubing
• 8x Turned Eye Bolts for use with Tie Downs
• 16x Galvanized Lock Nuts for locking in Eye Bolts

* The tubing size of the trailer will determine which U Bolts will be needed to secure the uprights to the frame

Click the following link for Assembly Instructions

https://cdn.shopify.com/s/files/1/1557/3371/files/Canoe_Kayak_Kit_Assembly_Instructions.pdf