PT-2426 Parts
TecNiq-S14 Red LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-R24 Red LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
TecNiq Part No. S14-RRS1-1
MODEL: CFLIGHTSDMRKR-LED(TEC-R24)
Used on
TecNiq Red Low Profile ID Light Bar w/ Ground Terminal
$19.99 $10.50
Brand Com-Fab
General
Red Low Profile ID Light Bar w/ Ground Terminal
- Used on all Pontoon Trailer models
- Screws included with purchase
- Meets all FMVSS 108 requirements for wide and narrow vehicles
- IP68 Rated - Dust and water proof with hermetic seal
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
- Reliable performance over 100,000 hours
- Can be mounted horizontal, vertical, or at any angle
TecNiq Model No. T10-RR00-1
MODEL: CFLIGHTBAR-LED(S-TEC)
Used On
Pontoon Trailer Winch Assembly Mounting Kit for 4"x3" Trailer Tongue
$24.99
Brand Com-Fab Trailers
General
Pontoon Trailer Winch Assembly Mounting Kit for 4"x3" Trailer Tongue
This kit contains all of the requisite materials needed to mount a Pontoon Winch Assembly onto all Galvanized Pontoon/Tritoon Trailer models
Materials Include:
2 – 1/2"-13 x 3.06" x 5.31" Galvanized U-Bolts
2 – 1/2" SAE Galvanized Flat Washers
2 – 1/2"-13 Galvanized Tri-Lock Nuts
MODEL: CFWNCHKIT-(PT-G)
Used On
PT1618PT1820
PT2022
PT2224
PT2426
Black Powder Coated Side Mount Spare Tire Carrier
$49.99 $35.00
Brand Com-Fab
General
Black Powder Coated Side Mount Spare Tire Carrier
- This item is optional for all of our Black Powder Coated Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The powder coated finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Black Powder Coated Trailer Models Only
TIEDOWN MODEL: #86100
MODEL: CFSTB-SIDE(B)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL BLACK POWDER COATED TRAILER MODELS
10.25" Black Marine Carpet
$2.50
Brand Com-Fab
General
Black Marine Carpet 10.25" Width
$2/ft in 100 ft rolls
- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models and Canoe/Kayak Angler Kits.
If you are purchasing this carpet it needs to be a foot longer than the board itself.
This carpet comes in these specific sizes as well:
- 5 ft Bunk Board Black Marine Carpet
- 6 ft Bunk Board Black Marine Carpet
- 7 ft Bunk Board Black Marine Carpet
MODEL: CFBNKCOVER-CARPET(10.25)
Used on
JBT-900
JBT-1400
JBT-1600
JBT-1600 ‘RIVER HAWK’
Optional for
Side Crank Swivel Jack Mounting Kit for 1200/1500lb Jacks
$14.99
Brand Com-Fab
General
Side Crank Swivel Jack Mounting Kit
This kit contains all of the parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models
MODEL: CFJACK-MNTKIT
Used on
ALL COM-FAB TRAILER MODELS
1-3/8" L68149 Axle Bearing Cup
$10.99
Brand Com-Fab Trailers
This product is sold out
1-1/16" L44610 Axle Bearing Cup
$7.99
Brand Com-Fab Trailers
Tow Ready 20115 5-Flat Car End Tester
$14.99
Brand Com-Fab Trailers
13″ Black Machined V-Spoke Aluminum Tire & Wheel ST175/80R13 D Load Range
$235.00
Brand Com-Fab
General
ST175/80R13 D Load Range 13″ Aluminum Tire & Wheel 65 psi
This item is an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.
MODEL: CFTST175RLRD-VSPOKE