PT-2426 Parts

General

7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle

This kit is used to mount springs to 2" Square Trailer Axles.

- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.

- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.

Materials Include:

2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing

4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

8 - 1/2″-13 Galvanized Tri-Lock Nut

MODEL: CFAXLE-TIEPLATEKIT(7000-G)

Used on

General

Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue

It is used to mount Actuators to all Pontoon Boat Trailer models w/ Brakes.

Materials Include:

3 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt

3 - 1/2″-13 Top Lock Nut Zinc

MODEL: CFCPLRNUT/BLT-KIT-3

Used on

General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center - Shackle Link

- This item is part of the CFBNKKIT-PWT(SGL-G) to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

General

Rhino Kote Galvanizing Graphic (4.5" x 3.5")

Dimensions: 4.5" x 3.5" 

MODEL: CFGRAPHIC-RHINOKOTE (4X3)

Used on

General

Company Graphic for Double PWT and Pontoon Trailers

This graphic sticks to the side of all Double PWT and Pontoon Boat Trailer models with Sides of 4" or 5" Tall Tubing.

Dimensions: 30.25" x 3"

MODEL: CFGRAPHIC-(4X2)

Used on

General

- Two of these are used with 1/4″ Zinc Nuts to mount TecNiq 8 Function 6" LED Tail Lights & TecNiq 7 Function 6" LED Tail Lights to all current Com-Fab Trailer Models

- Two of these are used with 1/4″ Zinc Nuts to mount Dry Launch Submersible Tail Lights to Pre-2018 Com-Fab trailer models.

MODEL: CFBLTLIGHT

Used On

ALL COM-FAB TRAILER MODELS

General

Coupler Mounting Kit for 3" Wide Trailer Tongues

This item is used to mount Couplers to all trailer models without Brakes.

Materials Include: 

2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt

2 - 1/2″- 13 Zinc Top Lock Nut

MODEL: CFCPLR-MNTKIT(NONBRK)

Used on

ALL COM-FAB TRAILER MODELS

General

Aluminum E-Coat Caliper Assembly - Dexter

This item is a Tie Down/Dexter Aluminum E-Coat Caliper Assembly used on all Pontoon Boat Trailer models w/ Brakes prior to 2023 on 3500 lb Hydraulic Disc Brake Axles.

Materials Include

2 - 2" Pistons

2 - Brake Caliper Bleeder Valves

1 - Brass Elbow

2 - Organic Pads w/ Dacromet Backs. .

MODEL: CFAXLE-CALIPER(AL)

MPN: TDE 46304AP or Dexter 089-46304A

Used on (w/ Brakes, pre-2023)

General

288″ Black Flex Hose Male-Banjo Brake Line - Dexter

This item is used for brake lines on select PT-2426 models only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46238-288

MODEL: CFBRKELINE-288(BLK)

Used on

PT-2426

General

Pontoon Boat Trailer Tandem Axle Fender Mounting Kit

This kit contains all of the requisite materials needed to mount a Tandem Axle Galvanized Pontoon Boat Trailer Fender onto all Tandem Axle Pontoon Boat Trailer models.

Materials Include:

4 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt

4 – 6" x 1.5" x 1.25" Galvanized Flat Plate

8 – 3/8″ Galvanized Tri-Lock Hex Nuts

MODEL: CFFNDRKIT-PTG(TA)

Used on

General

Dry Launch Amber Side Marker Light w/ 10" of Wire

This item is a Dry Launch 203 Series with a snap out bulb slide.

You can change the bulb without tools, and mount it with a single stud. It can be used as a Side Marker Light for the tongue of pre-2018 season Com-Fab Pontoon Boat Trailer models.

MODEL: CFLIGHTSDMRKR-10

MPN: 203AXS-9911

Optional for

General

Model 66 Brake Hose Cover

This item attaches to Tie Down "Model 66" 6600 Lb Capacity Hydraulic Disc Brake Actuator w/ 2" Coupler to protect the Brake Hose. Comes with 2 Small Screws. 

MODEL: CFBRKECOVER

Used on

General

7000# Galvanized Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width

This item is part of the 7000# Galvanized Tie Plate Kit used to mount Double Eye Leaf Springs on to 3500 lb Hydraulic Disc Brake Trailer Axles, 4250 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles.

MODEL: CFAXLE-TIEPLATE(7000-G)

MPN: TDE 44849DG

Specifications

Axle Size: 2" x 2" Square Axle

U-Bolt Size: 1/2"-13 x 2.06" x 4.31"

Dimensions: 4.49" x 3.5"

Tube Width: 2"

Spring Width: 1-3/4"

Hole Diameter: 9/16"

U-Bolt Finish: Galvanized

Plate Finish: Galvanized

Used on

General

3/8" Black Cable Clamp for Brake Lines

This item is secured onto the axle w/ use of a 12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw. The item is used for securing all brake lines to axles on Pontoon Boat Trailer models w/ Brakes.

MODEL: CFBRKECBLCLAMP

Used on

General

Tie Down 7/16" Diameter x 2.593 Stainless Steel Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

MODEL: CFAXLE-PIN(CALIPER-SS)

MPN: TDE 12114 or Dexter 007-692-00

Used on

General

Flat Pontoon Bunk Bracket #44879

Length: 9.02"

Base Length: 8.38"

Width: 3"

Height: 5.25"

Optional for

General

Heavy Duty Pontoon Bunk Bracket #43747

This item is optional for all Pontoon Boat Trailer models. It fits 2' x 4' and 2' x 6' boards.

Specifications

Length: 15.4"

Base Length: 13.13"

Width: 3"

Height: 6.07"

Optional for

General

Tie Down Galvanized Caliper Mounting Bracket for 9.6" Integral Rotor

This item is used with 7/16"-13 UNC x 1-1/4" Grade 5 Zinc Bolts to mount an Aluminum E-Coat Caliper Assembly for a 9.6" Integral Rotor to a brake flange on a 2" Square Axle. It is used on all Pontoon Boat Trailer models with Brakes.

MODEL: CFAXLE-BRKTMNT(CALIPER-1750-G)

MPN: TDE 44676G or Dexter 090-44676G

Used on

General

9/16"-18 Thread x 3" Shackle Bolt, Zinc-Plated

- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used to mount 3500 lb Hydraulic Disc Brake Trailer Axles, 4250 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.

- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, 4250 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.

MODEL: CFAXLE-BLT(SHACKLE-Z)

Used on

General

Tie Down Stainless Steel Caliper Bleeder Valve

This item is used on all TIE DOWN Aluminum E-Coat Caliper Assemblies. This item has a 1/8"-27 Stainless Steel Bleed Port.

TIE DOWN MODEL: #12114

MODEL: CFBRKE-BLEEDER

Used on

General

7/16"-14 Thread UNC x 1-1/4" Grade 5 Caliper Mounting Bolt, Zinc-Plated

Four of these are used to mount the Galvanized Caliper Mounting Bracket to the Brake Flange on all Trailer Models with Brakes prior to 2023.

MODEL: CFAXLE-BLT(CALPRBRKT-2125X-Z)

MPN: TDE 10812 or Dexter 007-10812

Used on (w/ Brakes pre-2023)

General

3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt

This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.

See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit

MODEL: CFUBLT3/8X2.06X5.25Z

MPN: TDE 83034Z

Used on

General

1/4″-20 Thread External Tooth Locknut, Zinc Nut for Tail Lights

- Two of these are used with 1/4″- 20 Tail Light Bolts to mount TecNiq 8 Function 6" LED Tail Lights to all current Com-Fab Trailer models.

- Two of these are used with 1/4″- 20 Tail Light Bolts to mount Dry Launch SP7 Red Tail Lights to all Pre-2018 Com-Fab trailer models.

- One of these is used w/ 2-3/4"-20 Thread Bolts to secure PWT winch strap to crank winch.

MODEL: CFNUT1/4LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

3/8″-16 Serrated Zinc Flange Nut

This item is part of these kits:

- 3/8"-16 Zinc Hex Head Bolts to mount all Crank Winch Models onto all Winch Post models.

- Black Powder Coated Winch Assembly Mounting Kit

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFNUT3/8SERTDZ

Used on

ALL Powder Coat Finish Trailer Models, and Most Galvanized Trailer Models for Winches