com-fab

General

Galvanized Winch Assembly Mounting Kit

This kit contains all of the requisite materials needed to mount a Galvanized Winch Assembly onto all Galvanized PWT trailer models.

Materials Include:

2 – 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt

2 – 5" x 1.25" x .25" Galvanized Flat Plate

4 – 3/8″ Galvanized USS Flat Washer

4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts

MODEL: CFWNCHKITG

Used on

General

Heavy Duty Pontoon Bunk Bracket #43747

This item is optional for all Pontoon Boat Trailer models. It fits 2' x 4' and 2' x 6' boards.

Specifications

Length: 15.4"

Base Length: 13.13"

Width: 3"

Height: 6.07"

Optional for

General

Heavy Duty Pontoon Trailer Winch Assembly Mounting Kit for 5"x3" Trailer Tongues

This kit contains all of the requisite materials needed to mount a Pontoon Winch Assembly onto a Heavy Duty Galvanized Pontoon/Tritoon Trailer model.

Materials Include: 

2 – 1/2"-13 x 3.06" x 6.31" Galvanized U-Bolts

2 – 1/2" SAE Galvanized Flat Washers

2 – 1/2"-13 Galvanized Tri-Lock Nuts

MODEL: CFWNCHKIT-(PTHD-G)

Used On

General

Jammy J-51-A 3/4" Single Diode PC Side Marker Light

The Jammy diode side marker light is a 3/4″ Round Single Diode, Amber-Colored LED Marker Light (PC Rated) that mounts in 3/4″ diameter holes. This model includes a mounting grommet, and 6″ leads with blunt cut ends.

MODEL: CFLIGHTSDMRKR-LED(J-51-A)

JBT 1600 w/10 Ft Bunks | Galvanized Trailer for 'River Hawk Style' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 10″ Carpeted Pressure Treated Bunks*
• Fits a 'River Hawk Style' Jon Boat 
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT1200G | Galvanized Trailer for 12' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• Carpeted 2″ x 4″ x 6' Flat Bunks*
• Fits up to a 12FT Jon Boat
• Carpeted Bow Support Bunk on all Models
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT1400G | Galvanized Trailer for up to 14' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 6' Carpeted Pressure Treated Bunks*
• Fits up to a 14' Jon Boat
• Carpeted Bow Support Bunk
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Options Available

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

JBT1600G | Galvanized Trailer for up to 16' Jon Boat

General

• Optional Side Swivel Tongue Jack Available
• 2″ x 4″ x 6' Carpeted Pressure Treated Bunks*
• Fits up to a 16" Jon Boat
• Carpeted Bow Support Bunk
• 5″ Poly Keel Roller and Bracket
• 600 LB Capacity Winch with Strap
• 4.80″ x 12″ Galvanized Tire & Wheel Assembly**
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Galvanized Hardware

Available Options

* Plastic Covering Available Upon Request
** Spare Tire Carrier Available Upon Request

Specifications

General

'River Hawk' Jon Boat Trailer Bunk Mounting Kit

This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 10′ Black Marine Carpeted Bunk Board onto the JBT-1600 'River Hawk' Style Jon Boat Trailer model.

Materials Include:

3 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

3 – 8″ Adjustable Bolster Bunk Bracket

3 – 3/8″-16 x 1" Galvanized Hex Head Bolt

3 – Galvanized Angular Swivel Bracket

6 – 3/8″-16 Galvanized Tri-Lock Nut

9 – 3/8″-16 Galvanized Flat Washer

6 – 5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-JBT(EXT)

Used on

JBT-1600 EXT (formerly JBT-1600 'River Hawk')

General

Jon Boat Trailer Bow Support Bunk Mounting Kit

These are all of the requisite materials needed to mount a 2″ x 4″ x 2′ Black Marine Carpeted Bow Support Bunk onto all Jon Boat Trailer models.

Materials Include:

1 – 3/8″ x 3" x 4.5″ Galvanized U-Bolt

2 – 8″ Galvanized Adjustable Bolster Bunk Bracket

2 – 3/8″-16 x 1″ Galvanized Hex Head Bolts

2 – Galvanized Angular Swivel Bracket

4– 3/8″-16 Galvanized Tri-Lock Hex Nut

4 – 3/8″ Galvanized Flat Washer

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

1 - 5" x 1.25" x .25" Galvanized Flat Plate w/ 9/16" Holes

MODEL: CFBNKKIT-BOWSPRT

Used on

General

Jon Boat Trailer Bunk Mounting Kit

This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto every Jon Boat Trailer model. 

Materials Include:

2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

2 – 8″ Adjustable Bolster Bunk Bracket

2 – 3/8″-16 x 1" Galvanized Hex Head Bolt

2 – Galvanized Angular Swivel Bracket

6 – 3/8″-16 Galvanized Tri-Lock Nut

6 – 3/8″-16 Galvanized Flat Washer

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-JBT

Used on

General

Jon Boat Trailer Fender Mounting Kit, Galvanized - JBT-12/14/1600 Models

These are all of the requisite materials needed to mount a Galvanized Fender 4.80 x 12” Tire onto every Jon Boat Trailer model.

Materials Include:

2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt

2 – 5" x 1.25" x .35" Galvanized Flat Plate

4 – 3/8" Galvanized Flat Washer

4 – 3/8" Galvanized Tri-Lock Nut

MODEL: CFFNDRKIT-JBT/KCT

Used on

General

Jon Boat Trailer Winch Assembly Mounting Kit

This kit contains all of the requisite materials needed to mount a 32" Galvanized Winch Assembly w/DL 600 onto all Jon Boat Trailer models.

Materials Include:

2 – 1/2″ x 3.06" x 5.31″ U-Bolt, Galvanized

2 – 5" x 1.25" x .25" Galvanized Flat Plate

4 – 1/2″-13 Tri-Lock Nuts, Galvanized

MODEL: CFWNCHKIT-(JBT-1/2)

*Photos show old zinc 3/8" Kit. Photos will be updated in near future*

Used on

General

TecNiq License Plate Bracket

MODEL: CFTAG-TEC

TECNIQ MODEL: L95-0B00-1

Used on

ALL COM-FAB TRAILER MODELS

General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB-TOP

Optional for

ALL COM-FAB TRAILER MODELS

General

Copper Crush Banjo Brake Fitting Washer (TDE Banjo System Models Only)

It works with the #70507 Brass Banjo Bolt or #11338 Stainless Steel Banjo Bolt (for use w/ Brass Base Banjo Fitting Block), Black O-Ring, and Tie Down Aluminum 46304A E-Coat Caliper Banjo Brake Line System.

Found on all Com-Fab Hydraulic Disc Brake Trailers manufactured pre-April 2023 Only.

Trailers manufactured after April 2023 no longer use the O-Ring + Copper Crush Washer Banjo System paired with TDE 46034A Calipers.

For use with:

– Black O-Ring, #17473

Tie Down Engineering (TDE) Model/Dexter Model: #11339/005-641-00

MODEL: CFBRKE-WSHRBANJO (1523)

Used on

General

Model 66 Brake Hose Cover

This item attaches to Tie Down Model 660E 6600Lb Capacity Hydraulic Disc Brake Actuator for 2" Ball  and Tie Down Model 850E 8500Lb Capacity Hydraulic Disc Brake Actuator for 2" Ball to protect the Brake Hose. Comes with 2 Small Screws. 

Tie Down Engineering (TDE) Model/Dexter Model: #43656/068-43656

MODEL: CFCPLR-COVER(BRAKE-66)

Used on

General

Model 660E 2" Ball 6600 lb GVWR Capacity Hydraulic Disc Brake Actuator Coupler; 660 lb Tongue Load (Includes Disc Brake Solenoid) - TDE/Dexter

This item is used with Hydraulic Disc Brake Setups on every Pontoon Boat Trailer model with Disc Brakes pre-February 2025. This item is mounted to Pontoon Boat Trailer models with an Actuator Mounting Kit

MODEL: CFCPLR-BRAKE(DISC-660)

Used on

General

2212B - Black Powder Coated Fender with Front & Rear Sidemarker Light Holes (Pre-Drilled/-Punched)

This fender is mounted onto a PWT-2212B trailer with a 2212B - Fender Mounting Kit, and fits a 4.80 x 12″ C Load Range Silver Tire & Wheel. It has been updated for 2020 to accommodate side lighting.

MODEL: CFFNDR1100/2212B-STEP (BENGAL)

Used on

PWT-2212B

General

2212G - Galvanized Fender with Front & Rear Side Marker Light Holes (Pre-Drilled/-Punched)

This fender is mounted to a PWT-2212G trailer model with a 2212G - Fender Mounting Kit, and fits a 4.80 x 12″ B Load Range Galvanized Tire & Wheel. It was updated for 2023 to accommodate side lighting.

MODEL: CFFNDR1100/2212G-STEP

Used on

General

Phoenix Stamping Angle Swivel Bracket, Galvanized - 7/16″ Top Hole

These are used to mount bunk boards onto all Jon Boat, and PWT Trailer models.

This item is part of these kits:

- 1000B/1100B - Bunk Mounting Kit

- 1000G/1100G - Bunk Mounting Kit

- 2212B - Bunk Mounting Kit

- 2212G - Bunk Mounting Kit

- 2213B/2214B - Bunk Mounting Kit

- 2213G/2214G - Bunk Mounting Kit

- Jon Boat Trailer Bunk Mounting Kit

- Jon Boat Trailer Bow Support Mounting Kit

- Extended (EXT)/'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFBRKTSWIVEL

MPN: PS-BB06G

Used on

PWT-1000B (Obsolete as of 2023)

PWT-1000G (Obsolete as of 2023)

PWT-2213B (Obsolete as of 2023)

PWT-2213G (Obsolete as of 2023)

General

Pontoon Boat Trailer Tandem Axle Fender Mounting Kit

This kit contains all of the requisite materials needed to mount a Tandem Axle Galvanized Pontoon Boat Trailer Fender onto all Tandem Axle Pontoon Boat Trailer models.

Materials Include:

4 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt

4 – 6" x 1.5" x 1.25" Galvanized Flat Plate

8 – 3/8″ Galvanized Tri-Lock Hex Nuts

MODEL: CFFNDRKIT-PTG(TA)

Used on

General

PT1400 | Galvanized Trailer for Mini-Pontoon Boat

Adjustable Bunks [ -3” ; +3”] and winch to better fit different types of vessel.

Specifications

PT1618G | Galvanized Trailer for up to 18' Pontoon Boat

General

• Fits up to 18 foot Pontoon Boat
• Straight Axles* with Independent Suspension
• Loading/Unloading Winch Stand with a High Capacity Winch with Strap and Hook
• Side Swivel Tongue Jack
• 2×4 Pressure Treated Plastic Covered Bunks
• Adjustable Bunks [ -2” ; +2”]
• ST175/80R13 D Load Range Tire and Wheel Assemblies
• Super Lube Bearing Lubrication System for Quick and Easy Greasing Access
• Submersible LED Lighting
• Amber LED Running Lights
• Galvanized Frame, Axles and Wheels

Available Options

• Spare Tire and Wheel Assembly
• Spare Tire Carrier
• Tritoon configuration
• Plastic Bunks Covering
• Galvanized Pontoon Guides
• 2×6 Upgrades
• Hydraulic Disc Brakes**

* Tandem Axle set up may be required
**Brakes May Be Required Per State Law, Check Your Local Transportation Authority For Guidelines and Regulations

Specifications