PWT-2213B Parts

General

Winch Poly Bow Roller Assembly

This kit is part of every Winch Assembly used on every PWT, and Jon Boat Trailer model. 

Materials Include:

1 – Galvanized Bow Stop Bracket

1 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt

1 – 3/8″-16 Zinc Hex Flange Top Lock Nut

1 – 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt

1 – 1/2″-13 Zinc Top Lock Nut

1 – 3″ Amber Poly Bow Roller

2 – 3″ Amber Poly Bow Roller Bell End

2 – 1/2″- Zinc Flat Washer

MODEL: CFASSM-WNCHRLR(3)

Used on

General

32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal Black) w/ DL 600 lb Winch

Materials Include

1 - 32" Black Powder Coated Winch Post, Smooth High Gloss Bengal Black

1 - 600 lb Capacity Dutton-Lainson Crank Winch w/ Handle

1 - Winch Poly Bow Roller Assembly

1 - Black Powder Coated Winch Assembly Mounting Kit

When mounted, the standard height for the bow roller is 18", but it can be adjusted to accommodate your particular boat. This is a 3" wide post with a 3" wide u-bolt mounting kit.

MODEL: CFWNCHASSM-2214B (BENGAL)

Used on

General

Dutton-Lainson 600LB Capacity Crank Winch

This item is a heavy duty winch used for horizontal pulling applications. It contains high carbon steel gears, permanently lubricated bearings, and a zinc Tuffplate(c) finish. A 12′ Winch Strap w/ Spring Loaded Hook and Loop End, and a Dutton-Lainson 900 lb 5" Winch Handle.

The mounting materials are sold separately.

Recommended for Mounting (Com-Fab):

2 - 3/8-16 x 1" Hex Head Bolt, Zinc

2 - 3/8-16 Serrated Flange Hex Nut, Zinc

MODEL: CFWNCH600(DL)

MPN: D.L. 14156

Used on:

General

D.L. 12′ Winch Strap w/ Spring Loaded Hook and Loop End

Strap is generally sold as a replacement part for the Dutton-Lainson 900lb & 600lb Capacity Crank Winch (CFWNCH900(DL) or CFWNCH600(DL)). If you have a Com-Fab PWC trailer this is the replacement strap for your trailer's winch. The strap has the following capabilities:

- Strap working load limit: 1,700 lbs

- Break strength: 2,600 lbs

- 12' Long strap with hook

- Hand saver loop dimensions: 1" x 18"

- Steel hook tensile strength: 3,750 lbs

- Mounting bolt & nut dimensions: 2-3/4"-20 Hex Head Bolt, Zinc & 1/4"-20 Hex Head External Tooth Locknut, Zinc

MODEL: CFWNCHSTRAP-12FT(PWC)

MPN: D.L. 24223

Used on:

General

3/8"-16 Zinc Hex Flange Top Lock Nut Zinc

This item is part of the:

– 1000B - Bunk Mounting Kit

– 2212B - Fender Mounting Kit

– 2213B - Fender Mounting Kit

– Winch Poly Bow Roller Assembly

– Pontoon Boat Trailer Winch Assembly

MODEL: CFNUT3/8LOCKZ

Used on

ALL COM-FAB TRAILER MODELS

General

Bow Stop and Winch Roller Bracket for Com-Fab (Steel) Marine Trailers, Galvanized

This item is part of the Winch Poly Bow Roller Assembly used on every type of winch stand for all Jon Boat and PWT trailer models. Fits with 1.5" x 3" tubing.

Dimensions: 2" x 3" x 8" w/ Hole 1.853" from Bottom

MODEL: CFBRKTWNCHRLR

Used on

PWT-1000B (Obsolete as of 2023)

General

Zinc U Bolt Winch Assembly Mounting Kit for Black Powder Coated Trailers

This kit has all of the requisite materials needed to mount a Black Powder Coated Winch Assembly onto any Black Powder Coated PWT trailer model.

Materials Include:

2 – 3/8″-16 x 3" x 4.5″ Zinc U-Bolt

2 – 5" x 1.25" x .25" Zinc Flat Plate

4 – 3/8″-16 Zinc Plated Serrated Flange Nuts

MODEL: CFWNCHKIT-(PWC-Z)

Used on

General

3" Poly Bow Roller Assembly

This is a section of the Winch Poly Bow Roller Assembly.

Materials Include:

1 – 3″ Poly Bow Roller 
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut

MODEL: CFASSM-POLYRLR(3)

Used on

General

3/8″-16 Serrated Zinc Flange Nut

This item is part of these kits:

- 3/8"-16 Zinc Hex Head Bolts to mount all Crank Winch Models onto all Winch Post models.

- Black Powder Coated Winch Assembly Mounting Kit

- Jon Boat Trailer Winch Assembly Mounting Kit

MODEL: CFNUT3/8SERTDZ

Used on

ALL Powder Coat Finish Trailer Models, and Most Galvanized Trailer Models for Winches

General

5"x 1.25" x .25" Zinc Flat Plate w/ 2 9/16" Holes and 3.5" Hole Centers

This item is part of these kits:

- Black Powder Coated Winch Assembly Mounting Kit

- 2212B - Fender Mounting Kit (pre-April 2024 Models)

- 2212B - Bunk Mounting Kit.

MODEL: CFFLTSTRPWNCHZ

Used on

General

3/8″-16 x 1″ Zinc Hex Head Cap Bolt

This item is used with 3/8"-16 Serrated Zinc Flange Nuts to mount all crank winch models onto every type of winch post. It is also part of the 2213B - Bunk Mounting Kit used to mount bunks onto PWT-2213B, and PWT-2214B trailer models. 

MODEL: CFBLT3/8X1Z

Used on

ALL COM-FAB TRAILER MODELS

General

32″ Black Powder Coated Winch Post (Smooth High Gloss Bengal)

This item is part of the 32″ Black Powder Coated Winch Assembly (Smooth High Gloss Bengal) w/ DL 600LB Winch that mounts to the PWT-2213B (Obsolete since 2023), and PWT-2214B trailer models with Zinc U Bolt Winch Assembly for Black Powder Coated Trailers.

MODEL: CFWNCHPOST(PWC-32)-B (BENGAL)

Used on

General

3/8″-16 x 3.06" x 4.5″ Zinc U-Bolt

This item is part of the Black Powder Coated Winch Assembly Mounting Kit used to mount all Black Powder Coated Winch Assemblies to all Black Powder Coated PWT trailer models.

MODEL: CFUBLT3/8x3.06x4.5Z

MPN: TDE 83364Z

Used on

General

3″ Amber Poly Bow Roller Bell End

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYEBELL-3

MPN: TDE 48654

Used on

General

3″ Amber Poly Bow Roller 

This item is used as part of every Winch Assembly mounted on every PWT, and Jon Boat Trailer model.

This item is part of these assemblies:

- 3" Poly Bow Roller Assembly

- Winch Poly Bow Roller Assembly

MODEL: CFPOLYBOWRLR-3

MPN: TDE 48653

Used on: