PT-2628 Parts

General

Tie Down 1/2" x 2-5/8" Disc Brake Caliper Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

TIE DOWN MODEL: 44676G

MODEL: CFAXLE-PIN(SLIDER)

Used on

General

Black Marine Carpet 10.25"

$1.75/ft in 100 ft rolls

- This carpet is used for bunks on all of our PWC Trailer, and Jon Boat Trailer models. It is optional for our Pontoon Trailer models.

- If you are purchasing this carpet it needs to be a foot longer than the board itself.

This carpet comes in these specific sizes as well:

- 5 ft Bunk Board Black Marine Carpet

- 6 ft Bunk Board Black Marine Carpet

- 7 ft Bunk Board Black Marine Carpet

MODEL: CFBNKCOVER-CARPET(10.25)

Used on

Optional for

General

ST175/80R13 D Load Range 13″ Galvanized Tire & Wheel 65 psi

This item is used on our PT-2426, and PT-2628 Trailer Models, but is also an upgradable option for all Trailer Models with 13" Tires.

MODEL: CFT175DLRD-G

Used on

Upgrade for

General

23.5″ Pontoon Boat Trailer Guide Post Assembly

This assembly includes:

1 - 23.5″ Pontoon Guide Post, w/ 2″ x 4″ x 1′ carpeted wood bumpers

2 - 7/16" x 2.06" x 4.31" Galvanized U-Bolt

4 - 3/8″ Galvanized Flat Washer

4 - 3/8″-16 Serrated Zinc Flange Nut

MODEL: CFPOST-GUIDE(ASSM)

Used on

General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center

- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

 General

20′ Winch Strap w/ Hook and Loop (4000 lb Max Capacity)

• Dutton-Lainson black heavy duty winch strap and hook
• For winches up to 2,600 lb. capacity
• 2" wide x 20' long
• 4,000 lb. breaking strength
• Snap Hook has a tensile strength of 7,500 lbs.
• Includes a 3/8" x 3" bolt, a 3/8" x 3-1/4" bolt, and a 3/8" locknut to install strap onto winch drum

MODEL: CFWNCHSTRAP-20FT(4K-DL)

General

1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

- This item is part of the BATIE190G Galvanized Tie Plate Kit used to mount 5-Leaf Slipper Springs (1,250 lb) to 2" Galvanized Axle Tubing for all PWT-2213G, and PWT-2214G trailer models.

- This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs (1850 lb) to 2" Galvanized Axle Tubing for all Pontoon Boat Trailer models.

TIE DOWN MODEL: #84404G

MODEL: CFAXLE-UBLT(2.0SQ-G)

Used on

General

1-1/16" L44649 Bearings

These bearings fit a 1-1/16" diameter Spindle Shaft, and are used with L44610 Bearing Cups. These are used on Tie-Down #1350, and #1750 Hubs

UNIVERSAL MODEL: L44649

TIE DOWN MODEL: #11054

MODEL: CFAXLE-BRG(1-1/16")-INNER/OUTER

Used on

ALL COM-FAB TRAILER MODELS

General

3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt

This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.

See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit

MODEL: CFUBLT3/8X2.06X5.25Z

Used on

General

Side Crank Swivel Jack Mounting Kit

This kit contains all of the requisite parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models

MODEL: CFJACK-MNTKIT

Used on

ALL COM-FAB TRAILER MODELS

General

1/2″- 13 Thread Galvanized Tri-Lock Nut

This item is part of these kits:

- Galvanized Axle Mounting Kit

- BATIE190G Tie Plate Kit

- 7000# Galvanized Tie Plate Kit

- Pontoon Winch Assembly Mounting Kit

- Heavy Duty Pontoon Winch Assembly Mounting Kit.

MODEL: CFNUT1/2TRILOCK

Used on

General

7/16"-13 UNC x 1-1/4" HHCS Grade 5 Zinc Bolt

Four of these are used to mount the Galvanized Caliper Mounting Bracket to the Brake Flange.

MODEL: CFAXLE-BLT(CALPRBRKT-Z)

Used on

General

7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle

This kit is used to mount springs to 2" Square Trailer Axles.

- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.

- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.

Materials Include:

2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing

4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt

8 - 1/2″-13 Galvanized Tri-Lock Nut

MODEL: CFAXLE-TIEPLATEKIT(7000-G)

Used on

General

1/4″ Zinc Nut for Tail Light

- Two of these are used with 1/4″-18 Tail Light Bolts to mount TecNiq 8 Function 6" LED Tail Lights to all current Com-Fab Trailer models.

- Two of these are used with 1/4″-18 Tail Light Bolts to mount Dry Launch SP7 Red Tail Lights to all Pre-2018 Com-Fab trailer models.

MODEL: CFNUT7/16LIGHT

Used on

ALL COM-FAB TRAILER MODELS

General

1 Inch Flat Spindle Washer - "ID" Washer

This item is used to help secure Hubs to Axle Spindles on all of our PWT models. It is placed in between the 12 Position Castle Nut w/Cotter Pin, and the Hub Assembly on the Axle Spindle. 

12 Position Castle Nut

5/32" x 2" Zinc Cotter Pin for Axle Spindle

Axle Spindle

Galvanized 5-Bolt Hub Assembly

Black Powder Coated 5-Bolt Hub Assembly

MODEL: CFAXLE-WSHR(SPINDLE)

Used on

ALL COM-FAB TRAILER MODELS

General

7000# Galvanized Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width

This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs on to 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles.

TIE DOWN MODEL: 44849DG

MODEL: CFAXLE-TIEPLATE(7000-G)

Specifications

Axle Size: 2" x 2" Square Axle

U-Bolt Size: 1/2"-13 x 2.06" x 4.31"

Dimensions: 4.49" x 3.5"

Tube Width: 2"

Spring Width: 1-3/4"

Hole Diameter: 9/16"

U-Bolt Finish: Galvanized

Plate Finish: Galvanized

Used on

General

1500 lb Side Crank Swivel Jack

• Dutton-Lainson swivel marine tongue jack for boat and other trailer applications
• 1,500 lb. capacity
• 24-3/4" maximum tongue height
• Side wind handle with extra heavy screw drive and ergonomic handle grip
• Heavy duty polypropylene 8" diameter slotted wheel resists flat spots and cold weather cracking
• Zinc plated finish for additional rust resistance and longer life
• Easily swivels up for towing or down for stowing and locks in place in either position
• Reinforced wheel bracket for additional strength
• Includes all necessary bolt-on mounting hardware
• Made in the U.S.A.

Dutton-Lainson Model: 6850

MODEL: CFJACKSIDE-6850

Used On

PT-2224
PT-2426
PT-2628

General

Heavy Duty Pontoon Trailer Winch Assembly Mounting Kit

This kit contains all of the requisite materials needed to mount a Pontoon Winch Assembly onto a Heavy Duty Galvanized Pontoon/Tritoon Trailer model.

Materials Include: 

2 – 1/2"-13 x 3.06" x 6.31" Galvanized U-Bolts

2 – 1/2" SAE Galvanized Flat Washers

2 – 1/2"-13 Galvanized Tri-Lock Nuts

MODEL: CFPTWNCHKITG-HD

Used On

General

1/2"-13 x 3.06" x 6.31" Galvanize U-Bolt

This item is used with 1/2"-13 Galvanized Tri-Lock Nuts, and 1/2" SAE Galvanized Flat Washers to mount Pontoon/Tritoon Model Trailer Winch Stands to Heavy Duty PT2426 Trailer models with 5"x3" tongues. It is part of the Heavy Duty Pontoon Trailer Winch Assembly Mounting Kit

MODEL: CFUBLT1/2x3.06x6.31G

Used On

General

1/2" SAE Galvanized Flat Washer

- This item is used with 1/2"-13 x 3.06" x 5.31" Galvanize U-Bolts, and 1/2"-13 Galvanized Tri-Lock Nuts to mount Pontoon/Tritoon Model Trailer Winch Stands to all Pontoon/Tritoon Trailer models. It is part of the Pontoon Winch Assembly Mounting Kit.

- This item is used with 1/2"-13 x 3.06" x 6.31" Galvanize U-Bolts, and 1/2"-13 Galvanized Tri-Lock Nuts to mount Pontoon/Tritoon Model Trailer Winch Stands onto Heavy Duty Pontoon/Tritoon Trailer models. It is part of the Heavy Duty Pontoon Winch Assembly Mounting Kit.

-This item is used with 7/16" x 2.06" x 4.31" Galvanized U-Bolts, and 7/16" Galvanized Tri-Lock Nuts to mount Kayak/Canoe Uprights to Kayak/Canoe Trailers. It is part of the Kayak/Canoe Upright Mounting Kit.

MODEL: CFWSHR1/2-SAE

Used on