PT-1820 Parts
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6.75" H = 3.5" D = 2-1/4"
Materials Include:
2 - 1/4"-18 Zinc Nut
MODEL: CFLIGHTREAR(R)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6.75" H = 3.5" D = 2-1/4"
Materials Include:
MODEL: CFLIGHTREAR(L)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
Locking Spare Tire Bracket, Fits 3″ Width Tubing
$19.99 $14.25
Brand Com-Fab
General
Locking Spare Tire Bracket, fits 3″ Width Tubing
This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.
MODEL: CFSTB-TOP
Optional for
ALL COM-FAB TRAILER MODELS
TecNiq-T86 7 Function 6" LED Tail Light (Passenger Side)
$34.99 $24.00
Brand Com-Fab
General
TecNiq-T86 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail
- These are optional for all Trailer Models.
- Multi-Function 6" Box Tail Light
- Urethane Potting w/ Guaranteed Circuit Board Protection
- Dust and water proof with hermetic seal
- Durable impact resistant lens
- Meets all FMVSS 108 requirements for narrow and wide vehicles
- Reliable performance over 100,000 hours
- Fits standard mounting as a direct replacement
- Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(R)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS
13″ Galvanized Tire & Wheel ST175/80R13 D Load Range
$135.00
Brand Com-Fab
General
ST175/80R13 D Load Range 13″ Galvanized Tire & Wheel 65 psi
This item is used on our PT-2426, and PT-2628 Trailer Models, but is also an upgradable option for all Trailer Models with 13" Tires. Speed rating is 81 mph.
MODEL: CFT175DLRD-G
Used on
Upgrade for
TecNiq-T86 8 Function 6" LED Tail Light (Driver Side)
$34.99 $25.75
Brand Com-Fab
General
TecNiq-T86 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.
-
Multi-Function 6" box tail light
-
Urethane Potting w/ Guaranteed Circuit Board Protection
-
Dust and water proof with hermetic seal
-
Durable impact resistant lens
-
Meets all FMVSS 108 requirements for narrow and wide vehicles
-
Reliable performance over 100,000 hours
-
Fits standard mounting as a direct replacement
-
Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(L)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS
2″ Steel Super Lube Grease Dust Cap & Plug Set (2x)
$9.99
Brand Com-Fab
General
2″ Steel Super Lube Grease Dust Cap & Plug for Axle Hub
This item is a part of all hub assemblies and comes as a pair.
Galvanized 5-Bolt Hub Assembly
Powder Coated Black 5-Bolt Hub Assembly
TIE DOWN MODEL: #17093
MODEL: CFAXLE-CAP&PLUG
Used on
ALL COM-FAB TRAILER MODELS
License Plate Bracket by TecNiq, black
$9.99 $2.00
Brand Com-Fab
General
TecNiq License Plate Bracket
TECNIQ MODEL: L95-0B00-1
MODEL: CFTAG-TEC
Used on
ALL COM-FAB TRAILER MODELS
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
Tecniq Part No. S14-AAS0-1
MODEL: CFLIGHTSDMRKR-LED(TEC-A24)
Used on
6600 lb Capacity Hydraulic Disc Brake Actuator w/ 2" Coupler - Dexter
$299.99 $215.99
Brand Com-Fab
General
Model 66 6600 lb GVWR Capacity Hydraulic Disc Brake Actuator; 660 lb Tongue Load; 2″ Coupler (Includes Disc Brake Solenoid) - Dexter
This item is used with Hydraulic Disc Brake Setups on every Pontoon Boat Trailer model with Disc Brakes.This item is mounted to Pontoon Boat Trailer models with an Actuator Mounting Kit
MODEL: CFCPLR-BRAKE(DISC-660)
Used on
23.5″ Pontoon Boat Trailer Guide Post Assembly Kit
$49.99
Brand Com-Fab
General
23.5″ Pontoon Boat Trailer Guide Post Assembly
This assembly includes:
1 - 23.5″ Pontoon Guide Post, w/ 2″ x 4″ x 1′ carpeted wood bumpers
2 - 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 - 3/8″ Galvanized Flat Washer
4 - 7/16" Galvanized Tri-Lock Nut
MODEL: CFPOST-GUIDE(ASSM)
Used on
2900 lb Galvanized PWC Idler Trailer Axle w/ 545 Hubs and Springs HF 87 SC 74
$425.00
Brand Com-Fab
General
2900 lb Galvanized Idler Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Double Eye Springs (1850 lb)
1 - 7000# Galvanized Tie Plate Kit
- This item is used on all Tandem, and Single Axle Non-Brake Setup Pontoon Boat Trailers.
- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.
- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit
**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. it is up to the individual dealer to stay within the guidelines as set by the legal authorities.
MODEL: CFAXLE2900G(IDLER)
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2900 lb
Hub Face: 87"
Spring Center: 74"
Overall Length: 92"
Bearing Size: 1-3/8" x 1-1/16"
Optional for
5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
$0.70
Brand Com-Fab
General
5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw
It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.
MODEL: CFSCRWLAG-5/16-0150
Used on
ALL COM-FAB TRAILER MODELS
4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes - Shackle Link
$4.99
Brand Com-Fab
General
4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center - Shackle Link
- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.
- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.
MODEL: CFFLTSTRPBUNK(SGL)G
Used on
1-1/16" L44649 Bearings
$5.75
Brand Com-Fab
General
1-1/16" L44649 Bearings
These bearings fit a 1-1/16" diameter Spindle Shaft, and are used with L44610 Bearing Cups. These are used on Tie-Down #1350, and #1750 Hubs
UNIVERSAL MODEL: L44649
TIE DOWN MODEL: #11054
MODEL: CFAXLE-BRG(1-1/16")-INNER/OUTER
Used on
ALL COM-FAB PWC, JON BOAT, AND CANOE/KAYAK TRAILER MODELS
2213/4G - Fender Mounting Kit
$19.99
Brand Com-Fab
General
2213/4G - Fender Mounting Kit
This kit contains all of the requisite materials needed to mount a Galvanized Fender 13" Tire onto 2213G, 2214G, and Pre-2019 Single Axle Pontoon Boat Trailer models.
Materials Include:
2 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
2 – 6" x 1.5" x 1.25" Galvanized Flat Plate
4 – 3/8″ Galvanized Tri-Lock Hex Nuts
MODEL: CFFNDRKITG-2213
Used on
1/2″-20 Lug Nut (Set of 5)
$7.50
Brand Com-Fab
General
1/2″-20 Lug Nut (Set of 5)
These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.
MODEL: CFNUTLUG
Used on
ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
$44.99
Brand Com-Fab
General
7000# Galvanized Tie Plate Kit for 2" Square Trailer Axle
This kit is used to mount springs to 2" Square Trailer Axles.
- It is a part of the 3500 lb Hydraulic Disc Brake Trailer Axle, used on Pontoon Boat Trailer models w/ Brakes.
- It is a part of the 2900 lb Idler Trailer Axle, used on Pontoon Boat Trailer models without Brakes.
Materials Include:
2 - 7000# Galvanized Tie Plate for 2" Square Axle Tubing
4 - 1/2"-13 x 2.06" x 4.31" Galvanized U-Bolt
8 - 1/2″-13 Galvanized Tri-Lock Nut
MODEL: CFAXLE-TIEPLATEKIT(7000-G)
Used on
Pontoon Boat Trailer Single Axle Mounting Kit
$39.99
Brand Com-Fab
General
Pontoon Boat Trailer Single Axle Mounting Kit
This kit is used to mount a 3500 lb Hydraulic Disc Brake Trailer Axle, or a 2900 lb Idler Trailer Axle to Single Axle Pontoon Boat Trailer Fenders on all Pontoon Boat Trailer models with Single Axle Setups.
Materials Include:
6 - 9/16"-18 x 3" Shackle Bolt
4 - 3.75" x 1.25" x .25" Zinc Steel Shackle Link
MODEL: CFAXLEKIT-MOUNT(PT-SA)
Used on
PT-1618
PT-1820
Pontoon Boat Trailer Tandem Axle Mounting Kit
$99.99
Brand Com-Fab
General
Pontoon Boat Trailer Tandem Axle Mounting Kit
This kit is used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or two 2900 lb Idler Trailer Axles to Tandem Axle Pontoon Boat Trailer Fenders on all Pontoon Boat Trailer models with Tandem Axle Setups.
Materials Include:
2 - Axle Equalizer
14 - 9/16"-18 x 3" Shackle Bolt
14 - 9/16"-18 Nylock Nut
8 - 3.75" x 1.25" x .25" Zinc Steel Shackle Link
MODEL: CFTANDEMMNTKIT
Used on
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
$9.99
Brand Com-Fab
General
Actuator Coupler Mounting Kit for 3" Wide Trailer Tongue
It is used to mount Actuators to all Pontoon Boat Trailer models w/ Brakes.
Materials Include:
3 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
MODEL: CFCPLRNUT/BLT-KIT-3
Used on
Company Graphic for Double PWT and Pontoon Trailers
$14.99
Brand Com-Fab
General
Company Graphic for Double PWT and Pontoon Trailers
This graphic sticks to the side of all Double PWT and Pontoon Boat Trailer models.
Dimensions: 30.25" x 3"
MODEL: CFGRAPHIC-(4X2)
Used on
Coupler Mounting Kit for 3" Wide Trailer Tongues
$7.99
Brand Com-Fab
General
Coupler Mounting Kit for 3" Wide Trailer Tongues
This item is used to mount Couplers to all trailer models without Brakes.
Materials Include:
2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
2 - 1/2″- 13 Zinc Top Lock Nut
MODEL: CFCPLR-MNTKIT(NONBRK)
Used on
ALL COM-FAB TRAILER MODELS
Pontoon Boat Trailer Tandem Axle Fender Mounting Kit
$29.99
Brand Com-Fab
General
Pontoon Boat Trailer Tandem Axle Fender Mounting Kit
This kit contains all of the requisite materials needed to mount a Tandem Axle Galvanized Pontoon Boat Trailer Fender onto all Tandem Axle Pontoon Boat Trailer models.
Materials Include:
4 – 3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
4 – 6" x 1.5" x 1.25" Galvanized Flat Plate
8 – 3/8″ Galvanized Tri-Lock Hex Nuts
MODEL: CFFNDRKIT-PTG(TA)