Parts
Replacement lights, tongue jacks, couplers, winches, brakes and other parts to keep your trailer working. Low prices on parts and shipping!
Try our Part Selector to find the right part for your trailer!
5-Leaf Slipper Springs 1,250 lb Capacity (Qty 2)
$99.99
Brand Com-Fab
General
5-Leaf Slipper Springs 1,250 lb Maximum Capacity (Qty 2)
- This item is mounted to the 2500 lb Galvanized Trailer Axle with a BATIE190G Galvanized Tie Plate Kit.
- This item is mounted to the 2500 lb Black Powder Coated Trailer Axle with a BATIE190Z Zinc Tie Plate Kit.
TIE DOWN MODEL: #13086
MODEL: CFAXLE5-LSPRNG(SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
1500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs HF 50.5 SC 41.18
$300.00
Brand Com-Fab
General
1500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs
*NOTE: If your trailer is older than 2006, call before ordering to ensure you receive the correct axle*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Slipper Springs (750 lb)
This item is mounted to the PWT-1000G, and PWT-1100G trailer models with a Galvanized Axle Mounting Kit.
MODEL: CFAXLE1500G
Specifications
Tubing: 1.5" Galvanized Square Axle
Load Rating: 1500 lb
Hub Face: 50.5"
Spring Center: 41.188"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
1/2″-20 Lug Nut (Set of 5)
$7.50
Brand Com-Fab
General
1/2″-20 Lug Nut (Set of 5)
These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.
MODEL: CFNUTLUG
Used on
ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS
3-Leaf Slipper Flat Springs 750 lb Capacity (Qty 2)
$89.99
Brand Com-Fab
General
3-Leaf Slipper Springs 750 lb Maximum Capacity (Qty 2)
- This item is mounted to the 1500 lb Galvanized Trailer Axle, as well as the 1500 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.
- This item is mounted to the 1500 lb Black Powder Coated Trailer Axle with a Zinc Tie Plate Kit.
TIE DOWN MODEL: #13087
MODEL: CFAXLE-LSPRNG(3-SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
2500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs HF 93.5 SC 83.5
$400.00
Brand Com-Fab
General
2500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 83" x 2" x 2" x 3/16" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 5-Leaf Slipper Springs (1,250 lb)
This item is mounted to the PWT-2213G, and PWT-2214G trailer models with a Galvanized Axle Mounting Kit.
MODEL: CFAXLE2500G
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2500 lb
Hub Face: 93.5"
Spring Center: 83"
Overall Length: 98.5
Bearing Size: 1-1/16"
Used on
1500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs HF 50.5 SC 41.18
$250.00
Brand Com-Fab
General
1500 lb Black Powder Coated PWC Trailer 545 Axle w/ Hubs and Springs
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 3-Leaf Slipper Springs (750 lb)
This item is mounted to the PWT-1000B, and the PWT-1100B with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE1500B
Specifications
Tubing: 1.5" Black Powder Coated Square Axle
Load Rating: 1500 lb
Hub Face: 50.5"
Spring Center: 41.19"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
2-Leaf Slipper Springs w/ Radius 550 lb Capacity (Qty 2)
$55.00
Brand Com-Fab
General
2-Leaf Slipper Springs w/ Radius 550 lb Maximum Capacity (Qty 2)
This item is mounted to the 1000 lb Galvanized Trailer Axle, and the 1000 lb Black Powder Coated Trailer Axle using a Zinc Tie Plate Kit.
TIE DOWN MODEL: #13070
MODEL: CFAXLE2-LSPRNG(SL)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
1000 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs HF 50.5 SC 41.18
$239.99
Brand Com-Fab
General
1000 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 2-Leaf Slipper Spring (550 lb)
This item is mounted to the PWT-800B with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE1000B
Specifications
Tubing: 1.5" Black Powder Coated Square Axle
Load Rating: 1000 lb
Hub Face: 50.5"
Spring Center: 41.188"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
PWT-800B
2500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs HF 93.5 SC 83.5
$355.00
Brand Com-Fab
General
2500 lb Black Powder Coated PWC Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 83" x 2" x 2" x 3/16" Gauge Black Powder Coated Axle Tubing
2 - Black Powder Coated 5-Bolt Hub Assembly
2 - 5-Leaf Slipper Springs (1,250 lb)
1 - BATIE190Z Zinc Tie Plate Kit
This item is mounted to the PWT-2213B, and PWT-2214B trailer models with a Black Powder Coated Axle Mounting Kit.
MODEL: CFAXLE2500B
Specifications
Tubing: 2" Black Powder Coated Square Axle
Load Rating: 2500 lb
Hub Face: 93.5"
Spring Center: 83"
Overall Length: 98.5"
Bearing Size: 1-1/16"
Used on
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
$5.99
Brand Com-Fab
General
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.
TIE DOWN MODEL: #83002G
MODEL: CFAXLE-UBLT(1.5SQ-G)
Used on
2900 lb Galvanized PWC Idler Trailer Axle w/ 545 Hubs and Springs HF 87 SC 74
$425.00
Brand Com-Fab
General
2900 lb Galvanized Idler Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Double Eye Springs (1850 lb)
1 - 7000# Galvanized Tie Plate Kit
- This item is used on all Tandem, and Single Axle Non-Brake Setup Pontoon Boat Trailers.
- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.
- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit
**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. it is up to the individual dealer to stay within the guidelines as set by the legal authorities.
MODEL: CFAXLE2900G(IDLER)
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2900 lb
Hub Face: 87"
Spring Center: 74"
Overall Length: 92"
Bearing Size: 1-3/8" x 1-1/16"
Optional for
4-Leaf Slipper Flat Springs 1000 lb Capacity (Qty 2)
$89.99 $70.00
Brand Com-Fab
General
4-Leaf Slipper Springs 1000 lb Maximum Capacity (Qty 2)
- This item is mounted to the 2000 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.
DEXTER MODEL: #13071
MODEL: CFAXLE-LSPRNG(4-SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
7000# Galvanized Tie Plate for 2" Square Axle Tubing
$9.99
Brand Com-Fab
General
7000# Galvanized Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width
This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs on to 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles.
TIE DOWN MODEL: 44849DG
MODEL: CFAXLE-TIEPLATE(7000-G)
Specifications
Axle Size: 2" x 2" Square Axle
U-Bolt Size: 1/2"-13 x 2.06" x 4.31"
Dimensions: 4.49" x 3.5"
Tube Width: 2"
Spring Width: 1-3/4"
Hole Diameter: 9/16"
U-Bolt Finish: Galvanized
Plate Finish: Galvanized
Used on
3/8"-16 x 1.56" x 3.63" Zinc U-Bolt - For Standard 1.5" SQ Tubing Axles
$4.99
Brand Com-Fab
General
3/8"-16 x 1.56" x 3.63" Zinc U-Bolt - For Standard 1.5" SQ Tubing Axles
This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.
TIE DOWN MODEL: #83002Z
MODEL: CFAXLE-UBLT(1.5SQ-Z)
Used on
2000 lb Extended Galvanized PWC Trailer Axle w/ 545 Hubs and Springs HF 91.5 SC 81.5
$349.99
Brand Com-Fab
General
2000 lb Extended Galvanized PWC Trailer Axle w/ 545 Hubs and Springs
This item is not shipped. Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340.
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 84.45" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Slipper Springs (750 lb)
This item is mounted to the PWT-2212G trailer model with a Galvanized Axle Mounting Kit, and to the PWT-2212B trailer model with a Black Powder Coated Axle Mounting Kit
MODEL: CFAXLE2000G-EXTENDED
Specifications
Tubing: 1.5" Galvanized Square Axle
Load Rating: 2000 lb
Hub Face: 91.5"
Spring Center: 81.5"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
3-Leaf Double Eye Springs 1850 lb Capacity (Qty 2)
$109.99
Brand Com-Fab
General
3-Leaf Double Eye Springs 1850 lb Maximum Capacity (Qty 2)
These are mounted to the 2900 lb Idler Trailer Axle, or the 3500 lb Hydraulic Disc Brake Trailer Axle using a 7000# Galvanized Tie Plate Kit. These are used on all of our Single, and Tandem Axle Pontoon Boat Trailer models.
TIE DOWN MODEL: #13093
MODEL: CFAXLE3-LSPNG(DE)
Specifications
Length: 20.00"
Leaf Width: 1.75"
Arch Height: 3.00"
Bushing Type: Nylon
Used on
Galvanized Axle Equalizer
$29.99
Brand Com-Fab
General
Axle Equalizer
Two of these axle equalizers are part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount 3-Leaf Double Eye Springs to frames on all Tandem Axle Setups for Pontoon Boat Trailers
MODEL: CFAXLE-EQUALIZER
Used on
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
$3.99
Brand Com-Fab
General
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
These are used to mount 2900 lb Idler Trailer Axles, or 3500 lb Hydraulic Disc Brake Trailer Axles to frames on all Single and Tandem Axle setups for Pontoon Boat trailers, and are frequently used in conjunction with axle equalizers.
Pontoon Boat Trailer Single Axle Mounting Kit
Pontoon Boat Trailer Tandem Axle Mounting Kit
TIE DOWN MODEL: #44536
MODEL: CFAXLELINK(Z)
Used on
1-3/8" L68149 Axle Bearing Cup
$10.99
Brand Com-Fab Trailers
This product is sold out
7000# Zinc Tie Plate for 2" Square Axle Tubing
$9.99
Brand Com-Fab
General
7000# Zinc Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width
TIE DOWN MODEL: 44849DZ
MODEL: CFAXLE-TIEPLATE(7000-Z)
Specifications
Axle Size: 2" x 2" Square Axle
U-Bolt Size: 1/2"-13 x 2.06" x 4.31"
Dimensions: 4.49" x 3.5"
Tube Width: 2"
Spring Width: 1-3/4"
Hole Diameter: 9/16"
U-Bolt Finish: Zinc
Plate Finish: Zinc