JBT-900 Parts
Winch Poly Bow Roller Assembly
$29.99
Brand Com-Fab
General
Winch Poly Bow Roller Assembly
This kit is part of every Winch Assembly used on every PWT, and Jon Boat Trailer model.
Materials Include:
1 – Galvanized Bow Stop Bracket
1 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt
1 – 3/8″-16 Zinc Hex Flange Top Lock Nut
1 – 1/2″-13 x 4.5″ Zinc Hex Head Cap Bolt
2 – 3″ Amber Poly Bow Roller Bell End
MODEL: CFASSM-WNCHRLR(3)
Used on
Galvanized Axle Mounting Kit
$8.99
Brand Com-Fab
General
Galvanized Axle Mounting Kit
This kit is used to mount Complete Galvanized Axles to all PWT, and Jon Boat Trailer models.
Materials Include:
2 - 1/2" x 3" Galvanized Hex Head Bolt
2 - 1/2"-13 Galvanized Tri-Lock Nuts
MODEL: CFAXLEMNTKITG
Used on
Jon Boat Trailer Bow Support Bunk Mounting Kit
$24.99
Brand Com-Fab
General
Jon Boat Trailer Bow Support Bunk Mounting Kit
These are all of the requisite materials needed to mount a 2″ x 4″ x 2′ Black Marine Carpeted Bow Support Bunk onto all Jon Boat Trailer models.
Materials Include:
1 – 3/8″ x 3" x 4.5″ Galvanized U-Bolt
2 – 8″ Galvanized Adjustable Bolster Bunk Bracket
4 – 3/8″-16 x 1″ Galvanized Hex Head Bolts
2 – Galvanized Angular Swivel Bracket
4– 3/8″-16 Galvanized Tri-Lock Hex Nut
4 – 3/8″ Galvanized Flat Washer
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
1 - 5" x 1.25" x .25" Galvanized Flat Plate w/ 9/16" Holes
MODEL: CFBNKKIT-BOWSPRT
Used on
Jon Boat Trailer Winch Assembly Mounting Kit
$19.99
Brand Com-Fab
General
Jon Boat Trailer Winch Assembly Mounting Kit
This kit contains all of the requisite materials needed to mount a 32" Galvanized Winch Assembly w/DL 600 onto all Jon Boat Trailer models.
Materials Include:
2 – 3/8″ x 3.06" x 5.25″ Zinc U-Bolt
2 – 5" x 1.25" x .25" Galvanized Flat Plate
4 – 3/8″-16 Serrated Zinc Flange Nuts
MODEL: CFWNCHKIT-(JBT)
Used on
Side Crank Swivel Jack Mounting Kit for 1200/1500lb Jacks
$14.99
Brand Com-Fab
General
Side Crank Swivel Jack Mounting Kit
This kit contains all of the parts needed to mount the 1200 lb Side Crank Swivel Jack, as well as the 1500 lb Side Crank Swivel Jack to all trailer frame models
MODEL: CFJACK-MNTKIT
Used on
ALL COM-FAB TRAILER MODELS
Jon Boat Trailer Fender Mounting Kit
$14.99
Brand Com-Fab
General
Jon Boat Trailer Fender Mounting Kit
These are all of the requisite materials needed to mount a Galvanized Fender 4.80 x 12” Tire onto every Jon Boat Trailer model.
Materials Include:
2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
2 – 5" x 1.25" x .35" Galvanized Flat Plate
4 – 3/8" Galvanized Flat Washer
4 – 3/8" Galvanized Tri-Lock Nut
MODEL: CFFNDRKIT-JBT
Used on
Zinc Axle Tie Plate Kit for 1.5" Square Trailer Axle
$34.99 $32.99
Brand Com-Fab
General
Zinc Tie Plate Kit for 1.5" Square Trailer Axle
- This kit is used to mount springs 1.5" Square Trailer Axles.
- This kit is part of both 1000 lb Trailer Axles used on the PWT-800, and Jon Boat Trailer models.
-This kit is also part of the 1500 lb Black Powder Coated Trailer Axle used on the PWT-1000B, and the PWT-1100B.
Materials Include:
2 - Zinc Axle Tie Plate for 1.5" Square Trailer Axle
4 - 3/8"-16 x 1.56" x 3.63" Zinc U-Bolt
MODEL: CFAXLEKIT-SPRNGMNT(1.5K-Z)
Used on
Coupler Mounting Kit for 3" Wide Trailer Tongues
$7.99
Brand Com-Fab
General
Coupler Mounting Kit for 3" Wide Trailer Tongues
This item is used to mount Couplers to all trailer models without Brakes.
Materials Include:
2 - 1/2″-13 x 4″ Zinc Hex Head Cap Bolt
2 - 1/2″- 13 Zinc Top Lock Nut
MODEL: CFCPLR-MNTKIT(NONBRK)
Used on
ALL COM-FAB TRAILER MODELS
Jon Boat Trailer Bunk Mounting Kit
$24.99
Brand Com-Fab
General
Jon Boat Trailer Bunk Mounting Kit
This kit contains all of the requisite materials needed to mount a 2″ x 4″ x 6′ Black Marine Carpeted Bunk Board onto every Jon Boat Trailer model.
Materials Include:
2 – 3/8″-16 x 3.06" x 2.38″ Galvanized U-Bolt
2 – 8″ Adjustable Bolster Bunk Bracket
2 – 3/8″-16 x 1" Galvanized Hex Head Bolt
2 – Galvanized Angular Swivel Bracket
6 – 3/8″-16 Galvanized Tri-Lock Nut
6 – 3/8″-16 Galvanized Flat Washer
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
MODEL: CFBNKKIT-JBT
Used on
3" Poly Bow Roller Assembly
$19.99
Brand Com-Fab
General
3" Poly Bow Roller Assembly
This is a section of the Winch Poly Bow Roller Assembly.
Materials Include:
1 – 3″ Poly Bow Roller
2 – 3″ Poly Bow Roller Bell End
1 – 1/2″-13 x 4.5″ Zinc Bolt
2 – 1/2″ Zinc Flat Washer
1 – 1/2″-13 Top Lock Nut
MODEL: CFASSM-POLYRLR(3)
Used on
5″ Poly Keel Roller Assembly for 3" Wide Trailer
$44.99 $40.00
Brand Com-Fab
General
5″ Poly Keel Roller Assembly for 3" Wide Trailer
Materials Included:
2 – 12.5″ Galvanized Adjustable Keel Roller Bracket
1 – 1/2″-16 x 6″ Zinc Hex Head Cap Bolt
2 – 3/8″-16 x 3.75″ Zinc Hex Head Cap Bolt
2 – 1/2″ USS Zinc Plated Washer
2 – 3/8″ Zinc Hex Flange Top Lock Nut
MODEL: CFKEELRLRASSM
Used on
Galvanized Side Mount Spare Tire Carrier
$49.99 $45.75
Brand Com-Fab
General
Galvanized Side Mount Spare Tire Carrier
- This item is optional for all of our Galvanized Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The galvanized finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Galvanized Trailer Models Only
TIEDOWN MODEL: #86098
MODEL: CFSTB-SIDE(G)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL GALVANIZED TRAILER MODELS
Black Powder Coated Side Mount Spare Tire Carrier
$49.99 $35.00
Brand Com-Fab
General
Black Powder Coated Side Mount Spare Tire Carrier
- This item is optional for all of our Black Powder Coated Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The powder coated finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Black Powder Coated Trailer Models Only
TIEDOWN MODEL: #86100
MODEL: CFSTB-SIDE(B)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL BLACK POWDER COATED TRAILER MODELS