Com-Fab

General

10 ft Walk Board Black Marine Carpet

Protective carpeting for the walk boards used on Double PWC trailers. 

10.5 ft by 12 in to fully cover the walk board

Used on:

PWT-2213G

PWT-2213B

PWT-2214G

PWT-2214B

General

10" Galvanized Adjustable Bolster Bunk Bracket

These are optional Bolster Brackets for all Jon Boat Trailer models.

Jon Boat Trailer Bunk Mounting Kit

TIE DOWN MODEL: #86131G

MODEL: CFBRKTBLSTR-10

Optional for

General

Black Marine Carpet 10.25"

$1.75/ft in 100 ft rolls

If you are purchasing this carpet for a 2' x 4" board it needs to be a foot longer than the board itself.

This carpet comes in these specific sizes as well:

- 5 ft Bunk Board Black Marine Carpet

- 6 ft Bunk Board Black Marine Carpet

- 7 ft Bunk Board Black Marine Carpet

MODEL: CFBNKCOVER-CARPET(10.25)

Used on

General

1000 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing 

2 - Black Powder Coated 5-Bolt Hub Assembly

2 - 2-Leaf Slipper Spring (550 lb)

1 - Zinc Tie Plate Kit

This item is mounted to the PWT-800B with a Black Powder Coated Axle Mounting Kit.

MODEL: CFAXLE1000B

Specifications

Tubing: 1.5" Black Powder Coated Square Axle

Load Rating: 1000 lb

Hub Face: 50.5"

Spring Center: 41.188"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on

PWT-800B

General

1000 lb Galvanized PWC Trailer Axle w/ Hubs and Springs

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 44.5" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing 

2 - Galvanized 5-Bolt Hub Assembly

2 - 2-Leaf Slipper Spring (550 lb)

1 - Zinc Tie Plate Kit

This item is mounted to the PWT-800G, and all Jon Boat Trailer models with a Galvanized Axle Mounting Kit.

MODEL: CFAXLE1000G

Specifications

Tubing: 1.5" Galvanized Square Axle

Load Rating: 1000 lb

Hub Face: 50.5"

Spring Center: 41.188"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on

General

1000B - Bunk Mounting Kit

These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Carpeted Black Marine Bunk Board onto PWT-1000B trailer models. This kit can also be used to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a PWT-800B trailer model, as well as a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a PWT-1100B trailer model.

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-1000B

Used on

General

1000G - Bunk Mounting Kit

These are all of the requisite materials needed to mount a 2″ x 4″ x 6′ Carpeted Black Marine Bunk Board onto PWT-1000G trailer models. This kit can also be used to mount a 2″ x 4″ x 5′ Black Marine Carpeted Bunk Board onto a PWT-800G trailer model, as well as a 2″ x 4″ x 7′ Black Marine Carpeted Bunk Board onto a PWT-1100G trailer model.

4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw

MODEL: CFBNKKIT-1000G

Used on

General

12 Position Castle Nut

This item is fastened to the end of an Axle Spindle with the use of a 5/32" x 2" Zinc Plated Cotter Pin. This combination secures Hubs to all PWC Trailer Models. It is rated for axles less than 3000 lbs. 

TIE DOWN MODEL: #10634

MODEL: CFAXLE-NUT(CASTLE-L)

Used on

General

12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw

- Two of these are used to mount 60" Red Triple Light ID Bars onto all Double PWT, and Pontoon Boat Trailer models.

- These are also used to mount brake lines to axles w/ 7/16" Black Cable Clamps.

MODEL: CFSCRWMETAL-TEK12

Used on

General

12" Black Marine Carpet

$2.00/ft in 100 ft rolls

If this item is being purchased for a 2" x 8" x 10' board it needs to be a foot longer than the board itself. This carpet is also available specifically cut for the 10 ft Walk Board.

MODEL: CFBNKCOVER-CARPET(12)

Used On

General

12.5" Galvanized Adjustable Keel Roller Bracket

Two of these are used with:

1 – 5" Poly Keel Roller
1 – 1/2″ Zinc Top Lock Nut

to create Keel Poly Roller Assemblies for JBT-1600 Frames.

TIE DOWN MODEL: #44017

MODEL: CFBRKTKEEL

Used on

General

1200 lb Side Crank Swivel Jack

This item fits 3″ x 5“ tongues. It comes with a 1200 lb Side Crank Swivel Jack Mounting Kit.

MAXIMUM CAPACITY: 1200LB

PACIDIC RIM MODEL: MJ-1200B

MODEL: CFJACKSIDE

Used on

ALL COM-FAB TRAILER MODELS

General

1200 lb Side Crank Swivel Jack Mounting Kit

This kit contains all of the requisite parts needed to mount a 1200 lb Side Crank Swivel Jack to all trailer frame models.

MODEL: CFJACK-MNTKIT

Used on

ALL COM-FAB TRAILER MODELS

General

12′ Winch Strap w/ Spring Loaded Hook and Loop End

Strap is generally sold as a replacement part for the Dutton-Lainson 900 lb Capacity Crank Winch (CFWNCH900DL). If you have a Com-Fab PWC trailer, excluding the lightweight PWT 800 and PWT 2212 models, this is the replacement strap for your trailer's winch.

MODEL: CFWNCHSTRAP-12FT(PWC)

Used on

General

ST175/80D13 C Load Range 13″ Galv. Tire & Wheel 65 psi

This item is used on PWT-2213G, PWT-2214G, and all Pontoon Boat Trailer models.

MODEL: CFT175DLRC-G

Used on

General

ST175/80R13 D Load Range 13″ Galvanized Tire & Wheel 65 psi

This item is used on most Tandem-Axle Pontoon Boat Trailer models, but is also an upgradable option for all Trailer Models with 13" Tires.

MODEL: CFT175DLRD-G

Optional on

General

ST175/80D13 C Load Range, 13″ Silver E-Coat Finish Tire & Wheel 65 psi

This item is used on PWT-2213B, and PWT-2214B trailer models.

MODEL: CFT175DLRC-S

Used on

General

14' Wire Harness Assembled w/ Protective Sleeve

The wiring is pulled through the PWT-800 trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Way Male Connector. This item comes with a 3/8 20" Protective Sleeve.

MODEL: CFWH14

Used on

General

14″ Black Powder Coated Winch Assembly w/ DL 900 lb Winch

This assembly includes a 14" Black Powder Coated Winch Post, a 900 lb Capacity Dutton-Lainson Crank Winch w/ Handle, a Winch Poly Bow Roller Assembly, and a Black Powder Coated Winch Assembly Mounting Kit.

Mounting Hardware Includes:

2 – 3/8″ x 3.06" x 4.5″ Zinc U-Bolt
2 – 5"x 1.25" x .25" Zinc Flat Plate
4 – 3/8″ Serrated Zinc Flange Nuts

MODEL: CFWNCH1000B

Used on

General

14″ Galvanized Winch Post

This item is used as part of 14" Galvanized Winch Assemblies for Single Galvanized PWT Trailers. 

14" Galvanized Winch Assembly w/ DL900 lb Winch

14″ Galvanized Winch Assembly w/ RAM 600 lb Winch

MODEL: CFWNCHPOST-1000G

Used on

General

14″ Galvanized Winch Assembly w/ DL 900 lb Winch

This assembly includes a 14" Galvanized Winch Post, a Dutton-Lainson 900 lb Capacity Crank Winch, a Winch Poly Bow Roller Assembly, and a Galvanized Winch Assembly Mounting Kit.

Mounting Hardware Includes:

4 – 3/8″-16 Galvanized Tri-Lock Hex Nuts

MODEL: CFWNCH1000G

Used on

General

14″ Powder Coated Black Winch Post

This item is used to create 14" Black Powder Coated Winch Assemblies for Single Black Powder Coated PWT Trailers.

14″ Black Powder Coated Winch Assembly w/ DL 900 lb Winch

14″ Black Powder Coated Winch Assembly w/ RAM 600 lb Winch

MODEL: CFWNCHPOST-1000B

Used on

General

1500 lb Black Powder Coated PWC Trailer Axle w/ Hubs and Springs

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 44.5" x 1.5" x 1.5" x 11 Gauge Black Powder Coated Axle Tubing 

2 - Black Powder Coated 5-Bolt Hub Assembly

2 - 3-Leaf Slipper Springs (750 lb)

1 - Zinc Tie Plate Kit

This item is mounted to the PWT-1000B, and the PWT-1100B with a Black Powder Coated Axle Mounting Kit.

MODEL: CFAXLE1500B

Specifications

Tubing: 1.5" Black Powder Coated Square Axle

Load Rating: 1500 lb

Hub Face: 50.5"

Spring Center: 41.188"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on

General

1500 lb Extended Galvanized PWC Trailer Axle w/ Hubs and Springs

This item is not shipped. Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340.

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 84.45" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing 

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Slipper Springs (750 lb)

1 - Galvanized Tie Plate Kit

This item is mounted to the PWT-2212G trailer model with a Galvanized Axle Mounting Kit, and to the PWT-2212B trailer model with a Black Powder Coated Axle Mounting Kit

MODEL: CFAXLE1500G-EXTENDED

Specifications

Tubing: 1.5" Galvanized Square Axle

Load Rating: 1500 lb

Hub Face: 91.5"

Spring Center: 81.5"

Overall Length: 56"

Bearing Size: 1-1/16"

Used on