X

Locking Spare Tire Bracket, Fits 3″ Width Tubing

$14.99

Brand Com-Fab


General

Locking Spare Tire Bracket, fits 3″ Width Tubing

This item is used to lock down, and transport a spare tire on all Com-Fab trailer models. Lock not included.

MODEL: CFSTB

Optional for

ALL COM-FAB TRAILER MODELS

More Details →
X

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

$5.99

Brand Com-Fab


General

3/8"-16 x 2.06" x 2.88" Galvanized U-Bolt

This item is part of the 1000G Bunk Mounting Kit used to mount bunks to PWT-800G, PWT-1000G, AND PWT-1100G trailer models.

MODEL: CFUBLT3/8X2.88G

Used on

PWT-800G
PWT-1000G
PWT-1100G
More Details →
X

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

$1.49

Brand Com-Fab


General

5/16″ x 1-1/2″ Galvanized Hex Head Lag Screw

It is used for mounting Bunk Boards to Galvanized Angular Swivel Brackets, and Pontoon Boat Trailer Bunk Brackets on all trailer models.

MODEL: CFSCRWLAG-5/16-0150

Used on

ALL COM-FAB TRAILER MODELS

More Details →
X

4" x 1" x .25" Galvanized Flat Plate w/ 1/2" Holes

$4.99

Brand Com-Fab


General

4" x 1" x .25" Galvanized Flat Plate w/ 2 1/2" Holes and a 2.5" Hole Center

- This item is part of the 1000G - Bunk Mounting Kit to mount Bunk Boards onto PWT-800G, PWT-1000G, and PWT-1100G trailer models.

- This item is part of the Tall Galvanized Bunk Bracket Kit used to mount mount 2″ x 4″ or 2″ x 6″ bunk boards on all Pontoon Boat Trailer models.

MODEL: CFFLTSTRPBUNK(SGL)G

Used on

PWT-800G
PWT-1000G
PWT-1100G
PT-1400
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
PT-2628
More Details →
X

1/2″-20 Lug Nut (Set of 5)

$14.99

Brand Com-Fab


General

1/2″-20 Lug Nut (Set of 5)

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS

More Details →
X

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

$4.99

Brand Com-Fab


General

3/8"-16 x 1.56" x 3.63" Zinc U-Bolt

This item is part of the Zinc Axle Tie Plate Kit used to mount 2-Leaf Slipper Springs (550 lb), and 3-Leaf Slipper Springs (750 lb) to 1.5" Square Axle Tubing.

    TIE DOWN MODEL: #83002Z

    MODEL: CFAXLE-UBLT(1.5SQ-Z)

    Used on

    PWT-800B
    PWT-800G
    PWT-1000B
    PWT-1100B
    PWT-2212B
    More Details →
    X

    3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt

    $5.99

    Brand Com-Fab


    General

    3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt

    This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

      TIE DOWN MODEL: #83002G

      MODEL: CFAXLE-UBLT(1.5SQ-G)

      Used on

      PWT-800G
      PWT-1000G
      PWT-1100G
      PWT-2212G
      PWT-2212B
      JBT-900
      JBT-1400
      JBT-1600
      JBT-1600 'RIVER HAWK'
      PT-1400
      More Details →
      X
      Sold Out

      Galvanized Side Mount Spare Tire Carrier

      $49.99

      Brand Com-Fab

      This product is sold out


      General

      Galvanized Side Mount Spare Tire Carrier

      • This item is optional for all of our Galvanized Trailer models.
      • It can accommodate wheels from 10" to 16.5" with a spare tire.
      • It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
      • The galvanized finish provides long lasting protection.
      • The item can mount to trailer frames up to 3" wide and 4" high. 

      *Used on Galvanized Trailer Models Only

      TIEDOWN MODEL: #86098

      MODEL: CFSTB-SIDE(G)

      Installation Instructions

      1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

      2. Slide U-bolt around the frame and through the holes in tire carrier.

      3. Mount with flat washers, lock washers and nuts provided.

      4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

      5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

      6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

      7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

      Optional for

      ALL GALVANIZED TRAILER MODELS

      More Details →
      X

      Black Powder Coated Side Mount Spare Tire Carrier

      $49.99

      Brand Com-Fab


      General

      Black Powder Coated Side Mount Spare Tire Carrier

      • This item is optional for all of our Black Powder Coated Trailer models.
      • It can accommodate wheels from 10" to 16.5" with a spare tire.
      • It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
      • The powder coated finish provides long lasting protection.
      • The item can mount to trailer frames up to 3" wide and 4" high.

      *Used on Black Powder Coated Trailer Models Only

      TIEDOWN MODEL: #86100

      MODEL: CFSTB-SIDE(B)

      Installation Instructions

      1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.

      2. Slide U-bolt around the frame and through the holes in tire carrier.

      3. Mount with flat washers, lock washers and nuts provided.

      4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.

      5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.

      6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.

      7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.

      Optional for

      ALL BLACK POWDER COATED TRAILER MODELS

      More Details →