3-Leaf Slipper Flat Springs 750 lb Capacity (Qty 2)
$89.99
Brand Com-Fab
General
3-Leaf Slipper Springs 750 lb Maximum Capacity (Qty 2)
- This item is mounted to the 1500 lb Galvanized Trailer Axle, as well as the 1500 lb Extended Galvanized Trailer Axle with a Galvanized Tie Plate Kit.
- This item is mounted to the 1500 lb Black Powder Coated Trailer Axle with a Zinc Tie Plate Kit.
TIE DOWN MODEL: #13087
MODEL: CFAXLE-LSPRNG(3-SF)
Specifications
Length: 24.63"
Leaf Width: 1.75"
Arch Height: 4.50"
Bushing Type: Nylon
Used on
1500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs HF 50.5 SC 41.18
$300.00
Brand Com-Fab
General
1500 lb Galvanized PWC Trailer Axle w/ 545 Hubs and Springs
*NOTE: If your trailer is older than 2006, call before ordering to ensure you receive the correct axle*
Materials Include:
1 - 44.5" x 1.5" x 1.5" x 11 Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Slipper Springs (750 lb)
This item is mounted to the PWT-1000G, and PWT-1100G trailer models with a Galvanized Axle Mounting Kit.
MODEL: CFAXLE1500G
Specifications
Tubing: 1.5" Galvanized Square Axle
Load Rating: 1500 lb
Hub Face: 50.5"
Spring Center: 41.188"
Overall Length: 56"
Bearing Size: 1-1/16"
Used on
Galvanized Tie Plate Kit for 1.5" Square Trailer Axle
$34.99
Brand Com-Fab
General
Galvanized Tie Plate Kit for 1.5" Square Trailer Axles
This kit is used to mount springs to Galvanized 1.5" Square Trailer Axles. The kit is a part of the 1500 lb Galvanized Trailer Axle used on every PWT-1000G, and PWT-1100G trailer model. It is also part of the 1500 lb Extended Galvanized Trailer Axle used on both PWT-2212 trailer models.
Materials Include:
2 - Galvanized Axle Tie Plate for 1.5" Square Trailer Axle
4 - 3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt
8 - 3/8"-16 Galvanized Tri-Lock Nut
8 - 3/8" Galvanized Lock Washer
MODEL: CFAXLEKIT-SPRNGMNT(1.5K-G)
Used on
1"-14 Thread 12 Position Castle Nut
$4.00
Brand Com-Fab
This product is sold out
General
12 Position Castle Nut
This item is fastened to the end of an Axle Spindle with the use of a 5/32" x 2" Zinc Plated Cotter Pin. This combination secures Hubs to all PWC Trailer Models. It is rated for axles less than 3000 lbs. It is a 1"-14 Thread 12-Slot Castle Nut to fit standard 1" trailer spindles.
TIE DOWN MODEL: #10634
MODEL: CFAXLE-NUT(CASTLE-L)
Used on
1/2″-20 Lug Nut (Set of 5)
$7.50
Brand Com-Fab
General
1/2″-20 Lug Nut (Set of 5)
These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.
MODEL: CFNUTLUG
Used on
ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
$5.99
Brand Com-Fab
General
3/8"-16 x 1.56" x 3.63" Galvanized U-Bolt - For Standard 1.5" SQ Tubing Axles
This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.
TIE DOWN MODEL: #83002G
MODEL: CFAXLE-UBLT(1.5SQ-G)