PT-1400 MiniToon Parts

General

2900 lb Idler Trailer Axle w/ 545 Hubs and Springs, Galvanized

*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*

*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*

Materials Include:

1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Double Eye Springs (1850 lb)

1 - 7000# Galvanized Tie Plate Kit

- This item is used on all Tandem, and Single Axle Non-Brake Setup Pontoon Boat Trailers.

- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.

- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit

**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. it is up to the individual dealer to stay within the guidelines as set by the legal authorities.

MODEL: CFAXLE2900G(IDLER)

Specifications

Tubing: 2" Galvanized Square Axle

Load Rating: 2900 lb

Hub Face: 87"

Spring Center: 74"

Overall Length: 92"

Bearing Size: 1-3/8" x 1-1/16"

Optional for

General

3/8″- 16 Galvanized Tri-Lock Nut

This item pairs with any 3/8"-16 Thread Galvanized Bolt or U-Bolt.

This item is part of these kits:

– Galvanized Winch Assembly Mounting Kit

– Galvanized Tie Plate Kit for 1.5" Square Axle Tubing

– 1000G - Bunk Mounting Kit

– 2212G - Bunk Mounting Kit

– 2212G - Fender Mounting Kit

– 2213G - Bunk Mounting Kit

– 2213G - Fender Mounting Kit

– Jon Boat Trailer Bunk Mounting Kit

– Jon Boat Trailer Fender Mounting Kit

– Jon Boat Trailer Bow Support Bunk Mounting Kit

– 'River Hawk' Jon Boat Trailer Bunk Mounting Kit

MODEL: CFNUT3/8TRILOCK

Used on

General

5/32" x 2" Cotter Pin, Zinc-Plated for Axle Spindle Hubs

It is used for fastening the Castle Nut to the Axle Spindle.

MODEL: CFAXLE-PIN(COTTER)

MPN: Dexter 019-10560

Used on

ALL COM-FAB TRAILER MODELS

General

1/2″-20 Lug Nut (Set of 5)

These are used for mounting tires on all trailer models to 1 1/2"-20 Threaded Stud.

MODEL: CFNUTLUG

Used on

ALL COM-FAB TRAILER MODELS WITH SILVER E-COAT OR GALVANIZED WHEELS

General

3500 lb Hydraulic Disc Brake Trailer Axle w/ Hubs and Springs, Galvanized

*This Item Is Not Shipped! Only Available For Local Pickup*

This item is used on all tandem, and single axle brake setup pontoon trailers.

Materials Include:

1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing

2 - Galvanized 5-Bolt Hub Assembly

2 - 3-Leaf Double Eye Springs (1850 lb)

1 - 7000# Galvanized Tie Plate Kit

1 - Vented Rotor Disc Brake Kit

- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.

- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit

**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. It is up to the individual dealer to stay within the guidelines as set by the legal authorities.

MODEL: CFAXLE3500G(DISC)-PT

Specifications

Tubing: 2" Galvanized Square Axle

Load Rating: 3500 lb

Hub Face: 87"

Spring Center: 74"

Overall Length: 92"

Bearing Size: 1-3/8" x 1-1/16"

Optional On

General

3/8"-16 x 1.56" x 3.63" U-Bolt, Galvanized - For Standard 1.5" SQ Tubing Axles

This item is part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

MODEL: CFAXLE-UBLT(1.5SQ-G)

MPN: TDE 83002G

Used on

General

3/8" Galvanized Split Lock Washer

These are part of the Galvanized Tie Plate Kit used to mount 3-Leaf Slipper Springs to Galvanized 1.5" Square Axle Tubing.

MODEL: CFAXLE-WSHRL(LSPRNG)

Used on

General

1 Inch Flat Spindle Washer - "ID" Washer

This item is used to help secure Hubs to Axle Spindles on all of our JBT, PWT & KCT Models. It is placed in between the 12 Position Castle Nut w/Cotter Pin and the hub's outer-facing bearing in the Hub Assembly on the Axle Spindle. 

12 Position Castle Nut

5/32" x 2" Zinc Cotter Pin for Axle Spindle

Axle Spindle

Galvanized 5-Bolt Hub Assembly

Black Powder Coated 5-Bolt Hub Assembly

MODEL: CFAXLE-WSHR(SPINDLE)

MPN: 005-10520

Used on

ALL COM-FAB TRAILER MODELS

1-3/8" L68149 Axle Bearing Cup/Race. For Use w/ 1750LB Hubs as Outer/Outward Facing Bearing.

General

1/2"-13 x 2.06" x 4.31" U-Bolt, Galvanized - Used on 2" Tubing Axles (up to 3.5K)