Parts
Replacement lights, tongue jacks, couplers, winches, brakes and other parts to keep your trailer working. Low prices on parts and shipping!
Try our Part Selector to find the right part for your trailer!
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Passenger Side) - Incandescent
The Dry Launch submersible 7-function passenger side tail light is waterproof with a bulb slide that has built-in dust, and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6" H = 3.5" D = 2-1/4"
Materials Include:
2 - 1/4"-18 Zinc Nut
MODEL: CFLIGHTREAR(R)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
$20.00
Brand Com-Fab
General
Dry Launch SP7 Red Tail Light (Driver Side) - Incandescent
The Dry Launch submersible 8-function driver side tail light is waterproof with a bulb slide that has a built-in dust and splash guard. It snaps out for easy bulb replacement.
Dimensions: W = 6" H = 3.5" D = 2-1/4"
Materials Include:
MODEL: CFLIGHTREAR(L)-INC(DL)
Optional for
ALL COM-FAB TRAILER MODELS
TecNiq-T86 7 Function 6" LED Tail Light (Passenger Side)
$34.99 $24.00
Brand Com-Fab
General
TecNiq-T86 7 Function 6" Box LED Passenger Side Tail Light w/ Pigtail
- These are optional for all Trailer Models.
- Multi-Function 6" Box Tail Light
- Urethane Potting w/ Guaranteed Circuit Board Protection
- Dust and water proof with hermetic seal
- Durable impact resistant lens
- Meets all FMVSS 108 requirements for narrow and wide vehicles
- Reliable performance over 100,000 hours
- Fits standard mounting as a direct replacement
- Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(R)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS
TecNiq-T86 8 Function 6" LED Tail Light (Driver Side)
$34.99 $25.75
Brand Com-Fab
General
TecNiq-T86 8 Function 8" Box Driver Side Tail Light w/ Pig Tail.
-
Multi-Function 6" box tail light
-
Urethane Potting w/ Guaranteed Circuit Board Protection
-
Dust and water proof with hermetic seal
-
Durable impact resistant lens
-
Meets all FMVSS 108 requirements for narrow and wide vehicles
-
Reliable performance over 100,000 hours
-
Fits standard mounting as a direct replacement
-
Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector,
Rear Reflector, and License Plate Light (Left)
Includes two 7/16" bolts w/ nuts for mounting.
MODEL: CFLIGHTREAR(L)-LED(TEC)
Used on
ALL COM-FAB TRAILER MODELS
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-S14 Amber LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
Tecniq Part No. S14-AAS0-1
MODEL: CFLIGHTSDMRKR-LED(TEC-A24)
Used on
TecNiq Red LED V-Shaped Light Bar w/ 58" Lead
$19.99 $11.25
Brand Com-Fab
General
TecNiq Red LED V-Shaped Light Bar w/ 58" Lead
- Used on all Double PWT Trailer models.
- Screws included with purchase
- Fully submersible LED Identification bar
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Available in colored or clear impact resistant lens
- IP68 rating while exceeding FMVSS 108 standards
- Reliable performance over 100,000 hours
MODEL: CFLIGHTBAR-LED(V-TEC)
Used On
Dry Launch 60″ Red Triple Light Bar
$11.25
Brand Com-Fab
General
Dry Launch 60″ Red Triple Light Bar
This light bar can be mounted to all Double PWT, and Pontoon Boat Trailer models. It is secured with two 12 x 3/4″ Zinc Hex Washer Head Tek #3 Screws.
MODEL: CFLIGHTBAR-60
Optional for
Dry Launch Amber Side Marker Light w/ 10" of Wire
$9.99
Brand Com-Fab
General
Dry Launch Amber Side Marker Light w/ 10" of Wire
This item is a Dry Launch 203 Series with a snap out bulb slide. You can change the bulb without tools, and mount it with a single stud. It can be used as a Side Marker Light for the tongue of all Pontoon Boat Trailer models.
MODEL: CFLIGHTSDMRKR-10
Optional for
17' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$14.50
Brand Com-Fab
General
17' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH16
Used on
TecNiq-S14 Red LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-R24 Red LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
TecNiq Part No. S14-RRS1-1
MODEL: CFLIGHTSDMRKR-LED(TEC-R24)
Used on
21' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$18.00
Brand Com-Fab
General
21' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH21
Used on
JBT-1600 ‘RIVER HAWK’
15' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$12.75
Brand Com-Fab
General
15' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the PWT-800 trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" ring terminal.
MODEL: CFWH14
Used on
Jammy J-51-A 3/4" Single Diode PC Side Marker Light
$4.99
Brand Com-Fab
General
Jammy J-51-A 3/4" Single Diode PC Side Marker Light
The Jammy diode side marker light is a 3/4″ Round Single Diode, Amber-Colored LED Marker Light (PC Rated) that mounts in 3/4″ diameter holes. This model includes a mounting grommet, and 6″ leads with blunt cut ends.
MODEL: CFLIGHTSDMRKR-LED(J-51-A)
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
$29.75
Brand Com-Fab
General
35' 4-Pin Wire Harness Assembled w/ Protective Sleeve
The wiring is pulled through the trailer frame to provide connection between the lighting and the vehicle. It connects to the vehicle with a 4-Pin Male Connector. This item comes with a 3/8 20" Protective Sleeve and 30" Ground with 1/2" Ring Terminal.
MODEL: CFWH35
Used on
TecNiq Red Low Profile ID Light Bar w/ Ground Terminal
$19.99 $10.50
Brand Com-Fab
General
Red Low Profile ID Light Bar w/ Ground Terminal
- Used on all Pontoon Trailer models
- Screws included with purchase
- Meets all FMVSS 108 requirements for wide and narrow vehicles
- IP68 Rated - Dust and water proof with hermetic seal
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
- Reliable performance over 100,000 hours
- Can be mounted horizontal, vertical, or at any angle
TecNiq Model No. T10-RR00-1
MODEL: CFLIGHTBAR-LED(S-TEC)