Parts

General

Tie Down 7/16" Diameter x 2.593 Stainless Steel Slider Pin

This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.

MODEL: CFAXLE-PIN(CALIPER-SS)

MPN: TDE 12114 or Dexter 007-692-00

Used on

General

Coupler Safety Pin - for TDE 660 & 850 Actuators

1/16-1/8IN 7x7x12.5 w/ 5/16 Safety Cable Pin. Used for Model TDE 660E and TDE 850E Actuators to Prevent Latch from Coming Undone

MODEL: CFCPLR-PIN (TDE)

MPN: TDE 50301, DEXTER 074-477-10

General

Model 660E 2" Ball 6600 lb GVWR Capacity Hydraulic Disc Brake Actuator Coupler; 660 lb Tongue Load (Includes Disc Brake Solenoid) - TDE/Dexter

This item is used with Hydraulic Disc Brake Setups on every Pontoon Boat Trailer model with Disc Brakes pre-February 2025. This item is mounted to Pontoon Boat Trailer models with an Actuator Mounting Kit

MODEL: CFCPLR-BRAKE(DISC-660)

Used on

General

Copper Crush Banjo Brake Fitting Washer (TDE Banjo System Models Only)

It works with the #70507 Brass Banjo Bolt or #11338 Stainless Steel Banjo Bolt (for use w/ Brass Base Banjo Fitting Block), Black O-Ring, and Tie Down Aluminum 46304A E-Coat Caliper Banjo Brake Line System.

Found on all Com-Fab Hydraulic Disc Brake Trailers manufactured pre-April 2023 Only.

Trailers manufactured after April 2023 no longer use the O-Ring + Copper Crush Washer Banjo System paired with TDE 46034A Calipers.

For use with:

– Black O-Ring, #17473

Tie Down Engineering (TDE) Model/Dexter Model: #11339/005-641-00

MODEL: CFBRKE-WSHRBANJO (1523)

Used on

General

27 Thread (1/8" NPS) Brass Round Banjo Bolt

This item is used in conjunction with a Black O-Ring and Copper Crush Washer for Round Banjo Brake Line Systems for Tie Down Engineering (TDE)/Dexter Aluminum 46304A Calipers only.

Found on all Com-Fab Hydraulic Disc Brake Trailers manufactured pre-April 2023 Only.

Standard Option on all Com-Fab Trailers prior to April 2023. Trailers manufactured after April 2023 no longer use the O-Ring + Copper Crush Washer Banjo System paired with TDE 46034A Calipers.

Hex Head - 5/8"

For use with:

– Black O-Ring, #17473

– Copper Banjo Fitting Washer, #11339

Tie Down Engineering (TDE) Model/Dexter Model: #70507/007-70507

MODEL: CFBRKE-BLTBANJO(RD-1523)

Used on

General

Model 66 Brake Hose Cover

This item attaches to Tie Down Model 660E 6600Lb Capacity Hydraulic Disc Brake Actuator for 2" Ball  and Tie Down Model 850E 8500Lb Capacity Hydraulic Disc Brake Actuator for 2" Ball to protect the Brake Hose. Comes with 2 Small Screws. 

Tie Down Engineering (TDE) Model/Dexter Model: #43656/068-43656

MODEL: CFCPLR-COVER(BRAKE-66)

Used on

General

Aluminum E-Coat Caliper Assembly - Dexter

This item is a Tie Down/Dexter Aluminum E-Coat Caliper Assembly used on all Pontoon Boat Trailer models w/ Brakes prior to 2023 on 3500 lb Hydraulic Disc Brake Axles.

Materials Include

2 - 2" Pistons

2 - Brake Caliper Bleeder Valves

1 - Brass Elbow

2 - Organic Pads w/ Dacromet Backs. .

MODEL: CFAXLE-CALIPER(AL)

MPN: TDE 46304AP or Dexter 089-46304A

Used on (w/ Brakes, pre-2023)

General

Tie Down Stainless Steel Caliper Bleeder Valve

This item is used on all TIE DOWN Aluminum E-Coat Caliper Assemblies. This item has a 1/8"-27 Stainless Steel Bleed Port.

TIE DOWN MODEL: #12114

MODEL: CFBRKE-BLEEDER

Used on

General

288″ Grey Poly Flex Hose Male-Banjo Brake Line - Dexter

This item is used as a brake line on PT-2426 models only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46223-288

MODEL: CFBRKELINE-288B(GREY)

Used on

PT-2426

General

Black O-Ring

This item is used for Com-Fab Trailers utilizing the Tie Down Banjo Brake System.

It works with the #70507 Brass Banjo Bolt or #11338 Stainless Steel Banjo Bolt (for use w/ Brass Base Banjo Fitting Block), #11339 M10 Copper Crush Washer, and Tie Down Aluminum 46304A E-Coat Caliper Banjo Brake Line System.

Found on all Com-Fab Hydraulic Disc Brake Trailers manufactured pre-April 2023 Only.

Trailers manufactured after April 2023 no longer use the O-Ring + Copper Crush Washer Banjo System paired with TDE 46034A Calipers.

For use with:

– Copper Banjo Fitting Washer, #11339

Tie Down Engineering (TDE) Model/Dexter Model: #17473/010-436-00

MODEL: CFBRKE-ORING

Used on

General

Brass Banjo Brake Fitting Block Base (TDE Banjo System Models Only)

This item is used in conjunction with a Banjo Fitting Bolt, a Black O-Ring and a Copper Crush Washer for brake line quick connect for Tie Down Engineering (TDE)/Dexter Aluminum 46304A Calipers only. 

No Longer Compatible as of April 2023 with Com-Fab Hydraulic Disc Brake Trailers

Banjo Bolt Through-Hole: ~0.405" (13/32") clearance bore to accept the 1/8"-27 NPS (0.39"–0.40" OD) banjo Bolt (007-691-00 /TDE #11338)

For use with:

– Copper Banjo Fitting Washer, #11339

Tie Down Engineering (TDE)/Dexter Model: #11348/#034-415-00

MODEL: CFBRKE-BASEBANJO

Used on

General

7/16"-14 Thread UNC x 1-1/4" Grade 5 Caliper Mounting Bolt, Zinc-Plated

Four of these are used to mount the Galvanized Caliper Mounting Bracket to the Brake Flange on all Trailer Models with Brakes prior to 2023.

MODEL: CFAXLE-BLT(CALPRBRKT-2125X-Z)

MPN: TDE 10812 or Dexter 007-10812

Used on (w/ Brakes pre-2023)

General

240″ Grey Poly Flex Male-Banjo Brake Line - Dexter

This item is used for brake lines on PT-2224 models and for those Axles/Trailers manufactured April 2023 and After only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46219-240

MODEL: CFBRKELINE-240B(GREY-0423)

Used on

PT-2224

General

Tie Down Galvanized Caliper Mounting Bracket for 9.6" Integral Rotor

This item is used with 7/16"-13 UNC x 1-1/4" Grade 5 Zinc Bolts to mount an Aluminum E-Coat Caliper Assembly for a 9.6" Integral Rotor to a brake flange on a 2" Square Axle. It is used on all Pontoon Boat Trailer models with Brakes.

MODEL: CFAXLE-BRKTMNT(CALIPER-1750-G)

MPN: TDE 44676G or Dexter 090-44676G

Used on

General

5/16" Black Cable Clamp for Brake Lines

This item is secured onto the axle w/ use of a 12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw. The item is used for securing all brake lines to axles on all Com-Fab Hydraulic Disc Brake Trailer models.

MODEL: CFBRKE-CBLCLAMP (5/16)

Used on

General

84″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter

This item is used to connect two Aluminum E-Coat Caliper Assemblies on Tandem Axle Pontoon Boat Trailers. 

MODEL: CFBRKELINE-84BB(GREY)

Used on

General

3500 lb Hydraulic Disc Brake Trailer Axle w/ Hubs and Springs, Galvanized

For those Com-Fab Hydraulic Disc Brake Trailers manufactured after April 2023 Only.

*This Item Is Not Shipped! Only Available For Local Pickup*

This item is used on all tandem and single axle brake setup Com-Fab Pontoon trailers that are neither -HD variants or Trailer Size Models 2628 and 2830.

Please refer to your trailer's title for information on trailer axle capacity and manufacturing date.

Materials Include:

1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing

2 - Vented 9.6" 545 5-Bolt Rotor Hub w/ Zinc-Plating

2 - UFP Disc Brake Caliper

2 - 3-Leaf Double Eye Springs (1850 lb)

1 - 7000# Galvanized Tie Plate Kit

- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.

- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit.

**Some states require brakes on all axles and/or wheels. Please refer to local laws when placing your order. It is up to the individual dealer and customer to stay within the guidelines as set by the legal authorities.

MODEL: CFAXLE3500G(DISC)-PT

Specifications

Tubing: 2" Galvanized Square Axle

Load Rating: 3500 lb

Hub Face: 87"

Spring Center: 74"

Overall Length: 92"

Bearing Size: 1-3/8" (Inside-Facing) x 30MM (Outside-Facing)

Optional On

General

288″ Black Flex Hose Male-Banjo Brake Line - Dexter

This item is used for brake lines on select PT-2426 models only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46238-288

MODEL: CFBRKELINE-288(BLK)

Used on

PT-2426

General

192″ Grey Poly Flex Male-Male Brake Line - Dexter

This item is optional on select PT-1618 and PT-1820 models only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46219-192

MODEL: CFBRKELINE-192(GREY)

Used on

General

192″ Black Flex Hose Male-Male Brake Line - Dexter

This item is optional on select PT-1618 and PT-1820 models only.

For use with:

– Banjo Fitting Base
– Square Banjo Fitting Bolt
– Black O-Ring
– Copper Banjo Fitting Washer

TIE DOWN MODEL: #46238-192

MODEL: CFBRKELINE-192(BLK)

Used on