Canoe and Kayak Trailers
We are pleased to be offering full canoe and kayak trailers in addition to the canoe & kayak conversion kits. Available in 12, 14 and 16 foot lengths, these trailers are excellent options for trailering everything from small, maneuverable kayaks to the largest canoes. Featuring dual steel rings for easy, secure attachment and optional protective padding, our trailers are sure to suit any potential need your customer may have!
Canoe and Kayak Trailers are currently ONLY shipped to dealerships
Angler Kayak Trailer Bunk Mounting Kit
$26.00
Brand Com-Fab
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt
2 – 4" x 1" x .25" Galvanized Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Galvanized Tri-Lock Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
2 x 4 x 10′ Black Marine Carpeted Bunk Board
$59.99 $55.00
Brand Com-Fab
General
2 x 4 x 10′ Black Marine Carpeted Bunk Board
This item is NOT shipped! Pickup ONLY from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
These are used as the standard option for JBT-1600 'River Hawk' Trailer models, as well as an upgradeable option for the JBT-1400 model.
'River Hawk' Jon Boat Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-10FT
Used on
AstroSlicks Plastic Padding for Canoe/Kayak Trailers and Kits
$4.99
Brand Com-Fab Trailers
These are the plastic protectors for your canoes and kayaks that go on our 2" square galvanized tubing, though applications are not limited to that particular tubing only. They ship with self tapping mounting screws depending on the length of padding.
4.80 x 12″ C Load Range Galvanized Tire & Wheel, Bias - Kenda/Loadstar
$109.00
Brand Com-Fab
General
4.80 x 12″ C Load Range 545 Hole Pattern Galvanized Finish Bias Tire & Wheel - Kenda/Loadstar
Tire Characteristics:
Diameter (Inches): |
18 |
Width (Inches): |
5 |
Weight (LBS): |
19 |
Speed Rating (MPH): |
J (62MPH) |
Capacity (LBS): |
990 (450kg) |
Max PSI (LBS/FT²): |
89 |
Torque Specs (LB-FT): |
50-75 |
Wheel Size (Inches): |
12 |
Wheel Hole/Bolt Pattern: |
5 x 4.5 |
MODEL: CFT48012G-LRC
Used on:
4.80 x 12″ C Load Range Silver E-Coat Tire & Wheel, Bias - Kenda/Loadstar
$92.50
Brand Com-Fab
General
4.80 x 12″ C Load Range 545 Hole Pattern Silver E-Coat Finish Bias Tire & Wheel - Kenda/Loadstar
This is the tire and wheel used on PWT-800B, PWT-1000B, PWT-1100B, and PWT-2212B black powder coated trailer models. Tire capacity is 990lbs (450kg). Speed rating 65 mph.
MODEL: CFT48012S-LRC
Used on
2IN Kayak/Canoe Trailer Upright Mounting Kit
$15.25
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
Used on
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
$40.00
Brand Com-Fab
General
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
These are used for our KCT angler kits
Used along with our Angler Kayak Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-8FT
3IN Kayak/Canoe Trailer Upright Mounting Kit
$13.75
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 - 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 - 3/8″ Galvanized USS Flat Washer
4 - 3/8″-16 Galvanized Tri-Lock Hex Nuts
Canoe/Kayak Crossbar Mounting Kit
$29.75
Brand Com-Fab
General
Kayak/Canoe Trailer Crossbar Mounting Kit
This kit is used to mount crossbars on all Kayak/Canoe Trailer Models post-2020.
This kit includes:
2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt
4 – 3/8"-16 Zinc Hex Flange Top Lock Nut
4 – 3/8″ Galvanized Flat Washer
1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
2 (each) – 1/2"-13 x 1.5" Bolt, Zinc and 1/2" Serrated Flange Nut to Tighten Crossbeam to Mounting Bracket
Square Tubing Plug for 2" Square Tubing (10-14GA) DB
$5.99 $1.25
Brand Com-Fab
General
2x2 Square Tubing Plug for 10-14 GA
This item is used on Pontoon Winch Stands as well as Canoe/Kayak Crossbars and Uprights. It may also be used in other applications utilizing 2" square tubing.
This item is part of these kits:
MODEL: CFCAP-2X2(10-14GA) DB
Used On
PT-1820
PT-2022
PT-2224
PT-2426
RAM 2" Ball Class II (3500LB) Latch Coupler for 2" Wide Tubing, Zinc
$19.50
Brand Com-Fab Trailers
General
RAM 2" Ball Class 2 (3,500lb) Zinc-Plated Latch Coupler for 2″ Wide Trailer Tongue
This item is mounted to all Canoe/Kayak Trailers with 2" Wide Tubing for their Trailer Tongues.
MODEL:
Specifications
Hole Diameter: 1/2"
Hole Distance: 2 1/2"
Hole Distance from Top: 5/8"
Hole Distance from Base: 1"
