Canoe and Kayak Trailer Kits
A Smart Option for All Enthusiasts
Our newest line of products feature a variety of setup options for converting existing trailers into canoe and kayak trailers! Most personal watercraft, jon boat, and other marine trailers are compatible with our system, even if they aren't Com-Fabs! Best of all, the attachment is not permanent and allows you to switch your trailer back to its previous setup whenever you desire. If you have questions about setup or compatibility, feel free to contact us.
- Fits on 1.5", 2" or 3" square or rectangular tubing
- Kits and bracing available for 2, 3, 4 or 6 canoe or kayak setups
- Uprights in 24", 30", 40", 48", 60" or 66" available depending on model
- 2x2x11 gauge upright bracing
- Crossbeams in 48" (top mount), 60" (kayak), or 80" (canoe) available
- 2x2x14 gauge crossbeams with steel channels for added stability
*Note: Canoe/Kayak kits have been updated. They now feature dual steel rings on each side of the crossbeam with available plastic protective padding.*
This is a Trailer Conversion Kit only and DOES NOT include a trailer
Angler Kayak Trailer Bunk Mounting Kit
$26.00
Brand Com-Fab
This kit contains all of the materials necessary to mount a bunk on one of our canoe or kayak trailers. The kit contains:
2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt
2 – 4" x 1" x .25" Galvanized Flat Plate
2 – Galvanized Angular Swivel Bracket
4 – 3/8"-16 Galvanized Tri-Lock Nut
4 – 5/16" x 1-1/2″ Galvanized Hex Head Lag Screw
AstroSlicks Plastic Padding for Canoe/Kayak Trailers and Kits
$4.99
Brand Com-Fab Trailers
These are the plastic protectors for your canoes and kayaks that go on our 2" square galvanized tubing, though applications are not limited to that particular tubing only. They ship with self tapping mounting screws depending on the length of padding.
60IN 14GA Galvanized Crossbar
$53.50
Brand Com-Fab Trailers
This product is sold out
60IN 14GA Galvanized Crossbar for Canoe/Kayak Kit
80IN 14GA Galvanized Crossbar
$64.50
Brand Com-Fab Trailers
This product is sold out
2IN Square 11GA Galvanized Upright
$85.00
Brand Com-Fab Trailers
2" x 2" x 11GA Galvanized Upright for Canoe/Kayak Kit. Available in 40", 48", 60", and 72".
2IN Kayak/Canoe Trailer Upright Mounting Kit
$15.25
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all Kayak/Canoe Trailer Models.
This kit includes:
2 – 7/16" x 2.06" x 4.31" Galvanized U-Bolt
4 – 1/2" SAE Galvanized Flat Washer
4 – 7/16" Galvanized Tri-Lock Nut
MODEL: CFRACKUPRIGHT-MNTKIT
Used on
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
$40.00
Brand Com-Fab
General
2″ x 4″ x 8′ Black Marine Carpeted Bunk Board
These are used for our KCT angler kits
Used along with our Angler Kayak Trailer Bunk Mounting Kit
MODEL: CFBUNKBRDC-8FT
3IN Kayak/Canoe Trailer Upright Mounting Kit
$13.75
Brand Com-Fab
General
Kayak/Canoe Trailer Upright Mounting Kit
This kit is used to mount uprights on all 3IN tubing Trailer Models.
This kit includes:
2 - 3/8″ x 3.06" x 4.5″ Galvanized U-Bolt
4 - 3/8″ Galvanized USS Flat Washer
4 - 3/8″-16 Galvanized Tri-Lock Hex Nuts
Canoe/Kayak Crossbar Mounting Kit
$29.75
Brand Com-Fab
General
Kayak/Canoe Trailer Crossbar Mounting Kit
This kit is used to mount crossbars on all Kayak/Canoe Trailer Models post-2020.
This kit includes:
2 – 3/8”-16 x 2.06” x 2.88” Galvanized U-Bolt
4 – 3/8"-16 Zinc Hex Flange Top Lock Nut
4 – 3/8″ Galvanized Flat Washer
1 – Mounting Bracket - 2" Channel w/ 1/2" Hexagonal Holes
2 (each) – 1/2"-13 x 1.5" Bolt, Zinc and 1/2" Serrated Flange Nut to Tighten Crossbeam to Mounting Bracket
Square Tubing Plug for 2" Square Tubing (10-14GA) DB
$5.99 $1.25
Brand Com-Fab
General
2x2 Square Tubing Plug for 10-14 GA
This item is used on Pontoon Winch Stands as well as Canoe/Kayak Crossbars and Uprights. It may also be used in other applications utilizing 2" square tubing.
This item is part of these kits:
MODEL: CFCAP-2X2(10-14GA) DB
Used On
PT-1820
PT-2022
PT-2224
PT-2426
RAM 2" Ball Class II (3500LB) Latch Coupler for 2" Wide Tubing, Zinc
$19.50
Brand Com-Fab Trailers
General
RAM 2" Ball Class 2 (3,500lb) Zinc-Plated Latch Coupler for 2″ Wide Trailer Tongue
This item is mounted to all Canoe/Kayak Trailers with 2" Wide Tubing for their Trailer Tongues.
MODEL:
Specifications
Hole Diameter: 1/2"
Hole Distance: 2 1/2"
Hole Distance from Top: 5/8"
Hole Distance from Base: 1"
